00196737-07_IM_eWinXP_DE_EN.pdf - 第17页
W indows XP Em bedded / I nstallat ion Ma nual Ausgabe 06/2013 Ed ition 17 The f ollowing win dow is displa yed: Figure 4-2 : Wi ndow SIPLACE XP embedded Conf igurator ► Enter the stati on IP - ad dress for SIPL ACE Pro …
Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition
16
The operating system is installed and the computer is automatically rebooted.
After a short time, the message Restore completed is displayed and you are prompted to
remove the data medium and restart the computer (or after having pressed the Exit button).
► Remove the CD/DVD from the DVD drive and press any key (or the OK button).
The computer starts and the Windows login window is displayed (the first reboot may take some
minutes).
► Insert the "SIPLACE XP embedded Configurator" software CD into the DVD drive.
► Log on as Administrator without entering a password.
4.3.2 Choosing the Computer Configuration
After the reboot dialogs are displayed for hardware that has not been installed, e.g.:
Figure 4-1: Not installed hardware
► Shut all windows with Cancel or OK.
► Open Windows Explorer (e.g. via "My Computer" on the desktop) and navigate to the DVD
drive.
► Double-click on the XPeConfigurator.hta file from the software CD to start the "SIPLACE XP
embedded Configurator".
Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition
17
The following window is displayed:
Figure 4-2: Window SIPLACE XP embedded Configurator
► Enter the station IP-address for SIPLACE Pro LAN (required for a station computer only) and
choose the suitable computer configuration.
The SIPLACE settings are automatically performed and the computer reboots.
After the reboot, you are logged on as Operator.
► If no touch screen is used (Vision or MC computer), remove the software CD from the DVD
drive.
Windows XP Embedded / Installation Manual Ausgabe 06/2013 Edition
18
5 Installing and Calibrating the Touch Screen
Now the touch screen has to be installed and calibrated (station computer only).
► Log on as Administrator and enter a password.
► In the "SIPLACE XP embedded Configurator", click on the Elo-TouchScreen driver button
under Optional Installation to install the touch screen driver and follow the installation
instructions.
► After installation, calibrate the touch screen as described in the installation manual for the
station software.
► Remove the software CD from the DVD drive.
If you have installed Windows XP Embedded in one-computer operation or on a machine
computer in two-computer operation, the installation is completed now.
► Install the SIPLACE machine software as described in the installation manual for the station
software.
If you have installed Windows XP Embedded on a Vision computer in two-computer operation:
► Perform the steps in chapter 6.