Apollo1_Operators_Manuel.pdf - 第14页
1 4 cab - Produkttechnik GmbH / Tharo Systems, Inc. Control features : Paper/ ribbon out Printhead locked : only Apollo 1 Control panel : 4 Function keys with LED display LCD can be set to display in 6 different language…
13cab - Produkttechnik GmbH / Tharo Systems, Inc.
Processor : 32 Bit, Motorola
Memory : Internal memory 2 MB
Interface : Serial : RS-232, RS-422, RS-485 1200-57600 Baud
Parallel : Centronics
Peripheral port : 15 pin SUB-D connector
for cutter, present sensor, or applicator
Test features : System test when switching on
Self test with printout of firmware data and system parameters
Label material and Thermal paper, normal paper, plastic foil,
continuous media : PE, PP, PVC, Polyamid
Adhesive labels : 60-160 g/sqm
Tag Stock : up to 180 g/sqm
Label width : .5 to 4.6 in (12-116 mm)
Label length : .2 to 21.5 in (5-546 mm) Apollo 1/2
.2 to 37.2 in (5-945 mm) Apollo 3
Core diameter : more than 1.6 in (40 mm)
Supply roll diameter : up to 8 in (200 mm)
Label rewind : inside and outside
Internal rewinder : Core diameter : 1.6 in (40 mm)
Max. rewinding diameter : 5.7 in (145 mm)
In dispense mode, media rolls of up to 8 in (200 mm) diameter may be
used.
Material recognition : Gap sensor ("see-through")
Bottom-reflective sensor
Top-reflective sensor (Apollo 1/2 only)
adjustable from .12 to 1.9 in (3-48 mm)
Transfer ribbon: Length : 1,182 in (360 m)
Outer diameter : 3 in (74 mm)
Core diameter : 1 in (25 mm)
Colour inside or outside
Ribbon Saver : The ribbon saver starts from an unprinted length of .5 in (12 mm).
(Apollo 1 only) Then, during label feed, the printhead will be lifted, and the transfer
ribbon will be paused from feeding.
Backfeed : In order to always start from the front edge of the label, in dispense/ cut
mode the label strip may be fed back after completion of the previous
print job.
To avoid smudging of the transfer ribbon onto the label material, the
printhead can be lifted during backfeed. (Apollo 1 only)
1 4 cab - Produkttechnik GmbH / Tharo Systems, Inc.
Control features : Paper/ ribbon out
Printhead locked : only Apollo 1
Control panel : 4 Function keys with LED display
LCD can be set to display in 6 different languages
Backlit LCD with 2 lines of text, 16 characters per line
Dimensions : Size : 11 in (280 mm) H; 9.8 in (250 mm) W; 18 in (458 mm) D
Weight : Apollo 1 : 36.4 lb. (16.5kg)
Apollo 2 : 33.1 lb. (15kg)
Apollo 3 : 28.7 lb. (13kg)
Operating voltage : Switchable between 230V A.C/ 50Hz or 115V A.C/ 60Hz
Maximum Apollo 1/2 : 1.5 A (at 230 V) or 3 A (at 115 V)
power input : Apollo 3 : 800 mA (at 230 V) or 1.6 A (at 115 V)
Circuit protection : Apollo 1/2 : T 3.15 A (at 230 V) or T 6.3 A (at 115 V)
Apollo 3 : T 1.6 A (at 230 V) or T 3.15 A (at 115 V)
Environment : Operation at 50° to 95°F (10°-35°C) at a humidity of 30 to 85%
Version Apollo 1 Apollo 2 Apollo 2 Apollo 3 Apollo 3
Article No. 5536400 5534700 5534900 5534600 5534800
Internal rewinder l - l - l
Ribbon saver l ----
External rewinder ¡¡¡¡¡
Cutter ¡¡¡¡¡
Ribbon shield ¡ - ¡ - ¡
Present sensor ¡ - ¡ - ¡
Memory card ¡¡¡¡¡
Keyboard adapter ¡¡¡¡¡
Applicator ¡ ----
l Standard ¡ Options
Table 1 a Overview of the equipment of the different Apollo's
15cab - Produkttechnik GmbH / Tharo Systems, Inc.
Optional Features
External Media Rewinders
For rewinding large print jobs, an external rewinder is available to handle an entire
label roll. Please note, that for an external rewinder, the maximum size of the
supply roll is limited to 8 in (200 mm) with a core diameter of 3 in (75 mm), or a
supply roll may be up to 7.5 in (190 mm) with a core diameter of 1.6 in (40 mm).
The external rewinder is mechanically linked to the Apollo by an adapter plate, but
works independently through its own power supply. Consequently, the rewinder
requires its own separate outlet for operation.
Cutter Assembly
With the optional cutter unit, labels or continuous media (up to 180 g/sqm) may be
cut immediately after printing. You can choose whenever you want to cut, whether
you cut off the individually, after a pre-selected quantity of labels have been printed,
or only at the end of a print job.
The cutter is powered and controlled directly by the peripheral connector of the
Apollo.
For cutter operation, the firmware of the Apollo will automatically backfeed the
label, so that after cutting, the label roll will be repositioned for the print of the next
label.
Rewind Guide Plate (for Apollo with internal rewinder only)
The rewind guide plate for rewinding the silicon liner, offers to rewind small print
jobs internally. The maximum rewind diameter greatly depends on the size of the
remaining media roll and is also limited by the location of the ribbon supply roll as
well as the ribbon take up.
Present sensor (for Apollo with internal rewinder only)
This option allows for on-demand labelling. The present sensor consists of the
tear-off plate and the sensor itself. The sensor, which is attached to the Apollo by
the peripheral connector, indicates the presence of a label, and pauses the printing
process until the label is removed.