00191376-07.pdf - 第40页
6 2-monthly maintenance jobs HS Preventive Maintenance 01/2006 US E dition 40 6
HS Preventive Maintenance 6 2-monthly maintenance jobs
01/2006 US Edition
39
Clean and grease the toothed belts for the X and Z axes 6
: Clean the toothed belts of the X and Z axes.
6
a Lightly grease the X axis toothed belt using a short-bristled brush moistened with ISOFLEX
TOPAS NCA 52.
s Lightly grease the Z axis toothed belt using a short-bristled brush moistened with ISOFLEX
TOPAS NCA 52.
: Distribute the grease evenly over the toothed belt by moving the axes back and forth.
: Remove any excess grease.
6
6
Maintain the component feeder table 6
d Clear the feeder area.
: Remove any loose components from the component feeder table using the vacuum cleaner.
f Use a whetstone to remove any bumps on the magnetic rail.
6
6
6
6
6
6
6
6
6
6
6 2-monthly maintenance jobs HS Preventive Maintenance
01/2006 US Edition
40
6
HS Preventive Maintenance 6 2-monthly maintenance jobs
01/2006 US Edition
41
a Preserve the feeder area using a lint-free cloth sprayed with WD40.
s Vacuum up any loose components from the tape container and remove any unwanted stickers
and adhesive tape.
6
d Cut off the excess used tape flush with the feeder and empty the component drawer or the
component flap on 8 mm S feeders.
: Return the feeders to the feeder area.
Make sure that each feeder is in the correct location and is connected correctly. 6
6
6
6
6
6
: Close the protective cover.
: Switch the placement machine on at the main switch.
: Repeat these tasks in every placement area.
6
6
6
6
6
6