00191376-07.pdf - 第68页
8 Annual maintenance work HS Preventive Maintenance 01/2006 US E dition 68 8
HS Preventive Maintenance 8 Annual maintenance work
01/2006 US Edition
67
: The Y axis gantry must have a grease nipple (figure A) in order to be able to use the grease
gun.
If this is not the case, remove the screw (figure B) and insert a grease nipple.
a Place the grease gun (item no.: 00366174-01), filled with ISOFLEX TOPAS NCA 52, straight
onto the grease nipple.
: Apply one squeeze of the grease gun.
8
If the grease emerges from the grease nipple, then either the bearing is already full or the grease
nipple is not sealing correctly. In the latter case, use a new grease nipple. 8
8
: Grease the other trolleys on the gantry in the same way.
8
Always grease both of the visible grease nipples on each gantry, i.e. a total of eight grease nipples
on the HS. 8
8
: Move the gantry approx. 30 cm to distribute the grease.
: Repeat the pressing and moving process three more times. This ensures that the right amount
of grease is applied.
: Use a cloth to remove any excess grease from on and around the grease nipple.
8
: Repeat the greasing process on all four gantries.
8
8
: Switch the placement system on again at the main switch.
8
8
8
8
8
8
8
8 Annual maintenance work HS Preventive Maintenance
01/2006 US Edition
68
8
HS Preventive Maintenance 8 Annual maintenance work
01/2006 US Edition
69
Function test for the used tape cutter 8
a Introduce a DIN A3 sheet or two DIN A4 sheets stuck together into the used tape channel.
8
One DIN A4 sheet on its own is too short to reach the tape cutter. 8
8
8
s Stick the sheet(s) firmly to the used tape channel using adhesive tape.
8
Make sure that no paper protrudes into the traveling range of the placement head. 8
8
8
d Log onto the station as a service engineer and start SITEST.
d Click on the "Component tables" button on the taskbar.
d In the view that appears, click on "Activate tape cutter".
8
: Remove the stuck-on sheet from the used tape channel.
Contact your Regional Service Center if it is not cut through cleanly.
8
8
8
8
8
8
8
8
8