00191376-07.pdf - 第77页
HS Preventive Maintenance 9 Maintain the sleeves 01/2006 US Edition 77 a Remove any d irt fro m the lo ng vacuu m hole by turning a 1.4 mm drill b it clock wise in the hole. T urning th e bit will remov e the dirt fr om …
9 Maintain the sleeves HS Preventive Maintenance
01/2006 US Edition
76
9
HS Preventive Maintenance 9 Maintain the sleeves
01/2006 US Edition
77
a Remove any dirt from the long vacuum hole by turning a 1.4 mm drill bit clockwise in the hole.
Turning the bit will remove the dirt from the hole.
s Remove the dirt from the transverse vacuum hole using the 1.1 mm drill bit.
9
Wear laboratory gloves to carry out this step. 9
9
9
d Check the suction plate for damage.
Replace it if it is damaged.
d Clean the sleeve suction plate using a dry, lint-free cloth.
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9 Maintain the sleeves HS Preventive Maintenance
01/2006 US Edition
78
9