00191376-07.pdf - 第47页

HS Preventive Maintenance 7 4-monthly m aintenance jobs 01/2006 US Edition 47 Z axis (front p art of head) 7 a Use a brush or cottonwo ol bud to move dir t from the Z axis too thed be lt. : Clean the ro llers, toothed wh…

7 4-monthly maintenance jobs HS Preventive Maintenance

01/2006 US Edition

HS Preventive Maintenance 7 4-monthly maintenance jobs

01/2006 US Edition

Z axis (front part of head) 7

a Use a brush or cottonwool bud to move dirt from the Z axis toothed belt.

: Clean the rollers, toothed wheels and the toothed belt with a cottonwool bud or lint-free cloth

moistened with ethyl alcohol.

: Check the toothed belt for wear.

Replace the toothed belt if it shows signs of wear (see

servicing instructions).

: Lightly grease the toothed belt with ISOFLEX TOPAS NCA 52 and remove any excess grease.

s Check that the Z axis guide runs easily and without play.

: Check the jaws for damage.

Contact your regional Service Center if there are any defects in the Z axis or jaws. 7

Oil the recirculating ball guide (lower bearing) 7

: Move the Z axis into its bottom position.

d Clean the grooves in the miniature roller table front and back using a cottonwool bud soaked

in ethyl alcohol.

: Wipe the needle of the oil dispenser.

Do not press any oil out of the oil dispenser. Just one visible drop would be too much oil. 7

f Simply place the needle directly on the ball cage/bearing, on the grooves of the guide rail.

When it makes contact, sufficient oil will be transferred to the grooves (capillary effect).

: Move the Z axis up and down several times to distribute the film of oil.

7 4-monthly maintenance jobs HS Preventive Maintenance

01/2006 US Edition