00197455-01_IM_TX150SS8_en.pdf - 第50页
Installing Prim ergy TX 150 S8 with W indows S erver 20 12 07/2012 Edit ion 50 4.4 Removing D efault G at ew a y As m entioned befor e, you h ave to rem ove the d umm y default gate way that was e ntered dur ing the Inst…
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
49
Figure 4-18: New Simple Volume Wizard – Completed
► Click the Finish button to complete the task. Formatting may take a couple of seconds.
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
50
4.4 Removing Default Gateway
As mentioned before, you have to remove the dummy default gateway that was entered during the
Installation Manager guided setup.
Figure 4-19: Network Icon
Figure 4-20: Opening Network Settings
► Right-click on the Network Icon in the lower right corner and select Open Network and Sharing
Center.
The Network and Sharing Center opens.
Figure 4-21: Network Sharing Center – clicking change adapter settings
► Click on Change adapter settings on the left side.
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
51
Figure 4-22: Network Adapters – SIPLACE LAN adapter connected
You see two network adapters displayed. If you followed this documentation, only the adapter with
the connection to the SIPLACE LAN should be connected (in this picture #1).
The other adapter is disconnected – it has a red “X” in the symbol (in this picture #2).
NOTICE
Network Card identification
This procedure only works if you have disconnected all other network cables except the
SIPLACE connection, as mentioned in the first chapter.
Now, we need to remove the default gateway from the configuration of the SIPLACE LAN network
adapter.
1
2