00197455-01_IM_TX150SS8_en.pdf - 第52页
Installing Prim ergy TX 150 S8 with W indows S erver 20 12 07/2012 Edit ion 52 Figure 4- 23 : Sel ecting Properties of the connected SIPLACE LAN adapter ► R ight - click on the conne cte d SIPL ACE L AN net wor k adapt e…
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
51
Figure 4-22: Network Adapters – SIPLACE LAN adapter connected
You see two network adapters displayed. If you followed this documentation, only the adapter with
the connection to the SIPLACE LAN should be connected (in this picture #1).
The other adapter is disconnected – it has a red “X” in the symbol (in this picture #2).
NOTICE
Network Card identification
This procedure only works if you have disconnected all other network cables except the
SIPLACE connection, as mentioned in the first chapter.
Now, we need to remove the default gateway from the configuration of the SIPLACE LAN network
adapter.
1
2
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
52
Figure 4-23: Selecting Properties of the connected SIPLACE LAN adapter
► Right-click on the connected SIPLACE LAN network adapter (the other adapter has the state
“Network cable unplugged”)
► Select Properties.
Figure 4-24: Ethernet Properties
► Click the Internet Protocol Version 4 (TCP/IPv4) text (not the checkbox!) and select Properties.
Installing Primergy TX150 S8 with Windows Server 2012 07/2012 Edition
53
Figure 4-25: IP Configuration of the SIPLACE LAN adapter before removing the default gateway
► Remove the default gateway entry from the IP configuration, as shown in the following picture.
Figure 4-26: IP Configuration of the SIPLACE LAN adapter after removing the default gateway
► Click the OK to close the window and apply the setting.