OperatorManual.pdf - 第8页
Access control Setup the password system i n the access control From the F ile menu, select A ccess Control z Add User - Select this option to create a new user name along with entering a password for the user name. z Pa…
Icons
If configured, this icon indicates the N2 valve status when the machine is running.
If edit online is active, clicking the icon can toggle the valve status.
The machine is in alarm. Click the icon to show the alarm list.
If configured, the barcode reader status (active or not). Click the icon to show the barcode
dialog box.
If configured, the UPS status (enabled or not). Click on the icon to show the UPS dialog
box.
Displayed when the alarm buzzer sounds. Silence it by clicking the icon.
Machine ready status. Machine is not ready or ready to accept boards.
Edit online. The button status (pressed/depressed) indicates the online status.
Indicates that the machine is in E-stop.
By clicking the icon an attempt is made to reset the E-stop situation.
If timer function is activated, this icon indicates the timer mode (active or standby).
By clicking the icon the timer/calendar dialog box will show in read-only mode.
Indicates that there is a message. By clicking the icon the message is displayed.
Indicates the oven hood is open.
If configured, clicking this icon shows the lubrication dialog. A red oil can indicates a low
tank
Level.
If the machine is stopped and the oven is hotter then 100 C, this icon will show.
Click this icon to access the quick cooldown function.
Manual rail adjustment.
Start a (new) recipe.
Activates the trending function.
Indicates machine status. Machine is off or on. Click this icon to turn the machine off or on.
Indicates that the cell fans are running.
How Do I on-line help icon. Clicking on this icon opens the on-line help function.
Operator manual 7 August 2003
Access control
Setup the password system in the access control
From the
F
ile menu, select
A
ccess Control
z
Add User
- Select this option to
create a new user name
along with
entering a password for the user
name.
z
Password Control
- This option
contains a list of program functions
with a corresponding password
yes/no setting for each program
function. The password yes/no
setting determines if password entry
is required prior to entering each
corresponding function and applies to
all of the user names. Also the
password yes/no setting takes
precedence over user privilege
settings. When a password is set to
no, all user's are allowed to access
the program function without a
password even if a user privilege is
set to no. The list of program
functions is factory preset.
z
Close
- Close the Access Control
menu
Operator manual 8 August 2003
The following functions are available when a user name is selected, or when a new user name is added:
Remove User
- Delete the selected user name from the list of user names.
User Password
- Change the password of the selected user name.
User Privileges-
This option contains a list of program functions along with a corresponding yes/no setting,
and is used to determine which program functions a user name is allowed to access.
A
Copy/Paste
function is available within this function to copy a complete set of privileges from one user
name to another user name.
PASSWORD PRIVILEGES
(
INDIVIDUAL USERS
)
To add a
user, click
on the Add
User
button.
When all
information
has been
entered,
click on
the OK
button
Highlight
the new
user name
and then
click on
the User
P
r
ivileges
button.
Select
privileges
for
individual
users
here.
Operator manual 9 August 2003