Maintenance Manual.pdf - 第149页

AV131 MAINTENANCE MANUAL 7.6 I nserti on Head Un i t D79MEC- Z1-M 00-A0 7.6- 2  Oiling Perio d No . Item T ask Oilin g vol ume Descrip tion 1. Sli ding surf ace of the cam f ollow er (5 are as) 2. Rotat ing beari ng of …

100%1 / 244
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-1
7.6. Insertion Head Unit
D79MEC-Z1-M00-A0
7.6.1 Insertion Head
Unit No. N6100552012AA
4. Sliding surfaces
between the shaft
and the bush
Detailed view of C
Detailed view of A
Bolt
1. Sliding surface of the
cam follower
A (3 positions)
B
5. Sliding surfaces between the
shaft and the bush (2 areas)
A
6. Sliding surfaces of the
shaft, bush and guide (3 areas)
10.Sliding surfaces
between the guide
and the rod
2. Rotating bearing of the
shaft
3. Sliding surfaces between
the slider and the frame
Detailed view of B
8. Trapezoidal screw
7. Sliding surface of
the slider
9. Sliding surfaces between
the shaft and the bush
13. Spring
14. Spring
11. Spring
12. Spring
17. Pin
1. Sliding surface of
the cam follower
18. Pin
16. Pin
15. Pin
19. Pin
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-2
Oiling
Period No. Item Task
Oiling
volume
Description
1.
Sliding surface of the
cam follower (5 areas)
2.
Rotating bearing of the
shaft
Set cycle timer to 262° for the lubrication.
3.
Sliding surfaces
between the slider and
the frame
4.
Sliding surfaces
between the shaft and
the bush
Position: Grease nipple
5.
Sliding surfaces
between the shaft and
the bush (2 areas)
6.
Sliding surfaces of the
shaft, bush and guide
(3 areas)
7.
Sliding surface of the
slider
8. Trapezoidal screw
9.
Sliding surfaces
between the shaft and
the bush
0.5 cm
3
Position: Grease nipple
Monthly
10.
Sliding surfaces
between the guide and
the rod
0.1 cm
3
11. Spring (x 2)
12. Spring (x 2)
13. Spring (x 2)
14. Spring
15. Pin (2 positions)
16. Pin (2 positions)
17. Pin (2 positions)
18. Pin (2 positions)
3
months
19. Pin (2 positions)
0.5 cm
3
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-3
7.6.2 Insertion Unit
Unit No. 1087110000
Inspection
Period No. Item Task Description
Remove foreign matter or dust.
a. Cutter blade
Make sure that the cutter blade is not worn or damaged.
b. Insertion guide
Make sure that the insertion guide is not worn or
damaged.
Daily
c. Bending die
Make sure that the tip of the bending die is not worn or
damaged.
4. Guide
6. Roller and slide cam
12.Fitting surfaces between the insertion
guide and the slide cam
b / 2. Insertion guide
a. Cutter blade
5. Guide base
1. Pusher
10. Pusher
b / 11. Insertion guide
8. Pin, lever and guide base
8. Pin, lever and guide base
7. Pin and block lever
3. Slide cam
c / 9. Pin, bracket and bending die