Maintenance Manual.pdf - 第151页

AV131 MAINTENANCE MANUAL 7.6 I nserti on Head Un i t D79MEC- Z1-M 00-A0 7.6- 4  Oiling Perio d No . Item T ask Oilin g vol ume Descrip tion 1. Pusher Posit i on: Up/down s l i ding surf aces 2. I nserti on guide 0.05 cm…

100%1 / 244
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-3
7.6.2 Insertion Unit
Unit No. 1087110000
Inspection
Period No. Item Task Description
Remove foreign matter or dust.
a. Cutter blade
Make sure that the cutter blade is not worn or damaged.
b. Insertion guide
Make sure that the insertion guide is not worn or
damaged.
Daily
c. Bending die
Make sure that the tip of the bending die is not worn or
damaged.
4. Guide
6. Roller and slide cam
12.Fitting surfaces between the insertion
guide and the slide cam
b / 2. Insertion guide
a. Cutter blade
5. Guide base
1. Pusher
10. Pusher
b / 11. Insertion guide
8. Pin, lever and guide base
8. Pin, lever and guide base
7. Pin and block lever
3. Slide cam
c / 9. Pin, bracket and bending die
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-4
Oiling
Period No. Item Task
Oiling
volume
Description
1. Pusher Position: Up/down sliding surfaces
2. Insertion guide
0.05 cm
3
3. Slide cam 0.05 cm
3
4. Guide
5. Guide base
6. Roller and slide cam
7. Pin and block lever
8.
Pin, lever and guide
base
0.02 cm
3
9.
Pin, bracket and
bending die
0.01 cm
3
Position: Sliding surface
10. Pusher
11. Insertion guide
0.02 cm
3
Position: Sliding surface in the direction of
pitch
Every
other
week
12.
Fitting surfaces
between the insertion
guide and the slide
cam
0.01 cm
3
Position: Fitting surface
AV131
MAINTENANCE MANUAL
7.6 Insertion Head Unit
D79MEC-Z1-M00-A0
7.6-5
7.6.3 Insertion Unit Drive
Unit No. N610052015AA
Inspection
Period No. Item Task Description
Make sure that the belt is not worn or damaged.
3
months
a. Belt
Make sure that belt tension is properly adjusted.
Oiling
Period No. Item Task
Oiling
volume
Description
1. Ball screw 0.5 cm
3
Every
other
week
2. LM guide (2 areas)
0.1 cm
3
each
Apply grease after removing all foreign
matters.
2. LM guide
a. Belt
1. Ball screw