KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1116页

33 E650275 Clamp error : Something is wrong w ith the backup motor movement of the center station. The process is forcibly terminated. Please remov e on the conveying route E650276 Clamp error : Hole reference process at…

Error Messages on PWB Transport Conveyor/Automatic PWB Transport /Idle PWB Transport

Error code Message

W650009 Conveying device error: | Since a PWB which interferences the check cylinder, | the cylinder

can not come up. | Please remove the PWB

E650010 Conveying device error: | Due to the abnormality of the check cylinder sensor, | cylinder can

not come up. | Please re-start the machine and check again

E650100 Conveying error : An asynchronous, abnormal event occurred while PWB conveying. The

process is forcibly terminated

W650203 PWB Conveying Error: There is no PWB objective to be conveyed

W650204 PWB Clamp Error : There is no PWB objective to be unlocked

W650205 Conveying Error : Please carry out the PWB on the Exit side station prior to the one on the

Entrance side station

W650209 PWB Conveying Error : A PWB has been detected on the conveying route. Please remove it

W650211 PWB Conveying Error : A PWB has been detected on the center station. Please remove it

W650212 PWB Conveying Error : A PWB has been detected on the center station on the Entrance

side. Please remove it

W650213 PWB Conveying Error : A PWB has been detected on the center station on the Exit side.

Please remove it

W650214 PWB Conveying Error : A PWB has been detected on the OUT buffer. Please remove it

W650219 PWB Conveying Error : In operation of PWB conveying

E650221 PWB Conveying Error : Illegal input buffer motor movement. The process is forcibly

terminated. Please remove on the conveying route

E650222 PWB Conveying Error : PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route

E650223 PWB Conveying Error: PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route”

E650224 PWB Conveying Error : PWB conveying time out error of Input buffer. The process is

forcibly terminated. Please remove on the conveying route

E650234 PWB Conveying Error : PWB conveying time out error of the center station. The process is

forcibly terminated. Please remove on the conveying route

E650242 PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650243 PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650244 PWB Conveying Error : PWB conveying time out error of the center station on the Entrance

side. The process is forcibly terminated. Please remove on the conveying route

E650252 PWB conveying error of the center station on the Exit side. The process is forcibly

terminated. Please remove on the conveying route

E650253 PWB Conveying Error : PWB conveying error of the center station on the Exit side. The

process is forcibly terminated. Please remove on the conveying route

E650254 PWB Conveying Error : PWB conveying time out error of the center station on the Exit side.

The process is forcibly terminated. Please remove on the conveying route

E650262 PWB Conveying Error : PWB conveying error of Output buffer. The process is forcibly

terminated. Please remove on the conveying route

E650264 PWB Conveying Error : PWB conveying time out error of Output buffer. The process is

forcibly terminated. Please remove on the conveying route

E650265 PWB Conveying Error : PWB conveying time out error of Output buffer. The process is

forcibly terminated. Please remove on the conveying route

E650271 Clamp error : Backup plate of the center station went up illegally. The process is forcibly

terminated. Please remove on the conveying route

E650272 Clamp error : Time-out occurred while backup plate of the center station went up. The

process is forcibly terminated. Please remove on the conveying route

E650273 Clamp error : Backup plate of the center station went down illegally. The process is forcibly

terminated. Please remove on the conveying route

E650274 Clamp error : Time-out occurred while backup plate of the center station went down. The

process is forcibly terminated. Please remove on the conveying route

E650275 Clamp error : Something is wrong with the backup motor movement of the center station.

The process is forcibly terminated. Please remove on the conveying route

E650276 Clamp error : Hole reference process at the center station finished illegally. The process is

forcibly terminated. Please remove on the conveying route

E650281 Clamp error : Backup plate of the center station on the Entrance side went up illegally. The

process is forcibly terminated. Please remove on the conveying route

E650282 Clamp error : Time-out occurred while backup plate of the center station on the Entrance

side went up. The process is forcibly terminated. Please remove on the conveying route

E650283 Clamp error : Time-out occurred while backup plate of the center station on the Entrance

side went down illegally. The process is forcibly terminated. Please remove on the

conveying route

E650284 Clamp error : Time-out occurred while backup plate of the center station on the Entrance

side went down. The process is forcibly terminated. Please remove on the conveying route

E650285 Clamp error : Something is wrong with the backup motor movement of the center station on

the Entrance side. The process is forcibly terminated. Please remove on the conveying

route

E650286 Clamp error : Hole reference process at the center station on the Entrance side finished

illegally. The process is forcibly terminated. Please remove on the conveying route

E650291 Clamp error : Backup plate of the center station on the Exit side went up illegally. The

process is forcibly terminated. Please remove on the conveying route

E650292 Clamp error : Time-out occurred while backup plate of the center station on the Exit side

went up. The process is forcibly terminated. Please remove on the conveying route

E650293 Clam error : Backup plate of the center station on the Exit side went down illegally. The

process is forcibly terminated. Please remove on the conveying route

E650294 Clamp error : Time-out occurred while backup plate on the center station on the Exit side

went down. The process is forcibly terminated. Please remove on the conveying route

E650295 Clamp error : Something is wrong with the backup motor movement on the center station on

the Exit side. The process is forcibly terminated. Please remove on the conveying route

E650296 Clamp error : Hole reference process at the center station on the Exit side finished illegally.

The process is forcibly terminated. Please remove on the conveying route

W650309 Idle PWB Conveying Error : PWB is detected on the conveying route. Please remove it

W650311 Idle PWB Conveying Error : A PWB is detected on the center station. Please remove it

W650312 Idle PWB Conveying Error : A PWB is detected on the center station on the Entrance side.

Please remove it

W650313 Idle PWB Conveying Error : A PWB is detected on the center station on the Exit side.

Please remove it

W650314 Idle PWB Conveying Error : A PWB is detected on the OUT buffer. Please remove it

W650319 Idle PWB Conveying Error : In operation of Idle PWB conveying

E650321 Idle PWB Conveying Error : Illegal input buffer motor movement. The process is forcibly

terminated. Please remove on the conveying route

E650322 Idle PWB Conveying Error : PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route

E650323 Idle PWB Conveying Error : PWB conveying error of Input buffer. The process is forcibly

terminated. Please remove on the conveying route”

E650324 Idle PWB Conveying Error : PWB conveying time out error of Input buffer. Please remove

on the conveying route

E650334 Idle PWB Conveying Error : PWB conveying time out error of the center station. The

process is forcibly terminated. Please remove on the conveying route

E650342 Idle PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650343 Idle PWB Conveying Error : PWB conveying error of the center station on the Entrance side.

The process is forcibly terminated. Please remove on the conveying route

E650344 Idle PWB Conveying Error : PWB conveying time out error of the center station on the

Entrance side. The process is forcibly terminated. Please remove on the conveying route

E650352 Idle PWB Conveying error : PWB conveying error of the center station on the Exit side. The

process is forcibly terminated. Please remove on the conveying route

E650353 Idle PWB Conveying Error : PWB conveying error of the center station on the Exit side. The

process is forcibly terminated. Please remove on the conveying route

E650354 Idle PWB Conveying Error : PWB conveying time out error of the center station on the Exit

side. The process is forcibly terminated. Please remove on the conveying route

E650362 Idle PWB Conveying Error : PWB conveying error of Output buffer. The process is forcibly

terminated. Please remove on the conveying route

E650364 Idle PWB Conveying Error : PWB conveying time out error of Output buffer.

E650365 Idle PWB Conveying Error : PWB conveying time out error of Output buffer. The process is

forcibly terminated. Please remove on the conveying route

E651001 Returning to ORIGIN has not been done

E651002 An error occurred when returning to ORIGIN

E651003 There is no need to move

E651004 The traveling movement has discontinued due to Backup pin detection

E651005 More than one command were tried to start at one time

E651006 An error occurred while issuing command run event

E651007 A time-out occurred while waiting for a command to be complete

E651008 Although the motor stopped, encoder does not stop

E651009 An error occurred when starting the motor

E651010 An error occurred while waiting for the motor to stop

E651011 An error occurred while reading ORIGIN sensor in