KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第1124页
41 [Treatm ent] Please nam e the file bef ore saving it. W105120 “The same named fil e exists. Do you want to overw rit e the fil e?” [Cause] T here is a file which has the s am e nam e as your file in the director y tha…
40
423
：
Failure in creating memory for the Image DP.
424
：
Failure in creating memory for the Cyclic data array.
425
：
Failure in creating memory for the Master1 Schedule data.
426
：
Failure in creating memory for the Master2 Schedule data.
427
：
Failure in creating memory for the Machine Management Information.
428
：
Failure in creating memory for the Nozzle Usage Information.
429
：
Failure in creating memory for the resumptive production.
42A
：
Failure in creating memory for the System Common data.
20000
：
Failure in starting the Data Manager.
40000
：
Failure in creating the Mail box.
80000
：
Failure in creating IPC for command response.
100001
：
Failure in starting the main process of the Error Manager
100002
：
Failure in starting the error process thread1.
100003
：
Failure in starting the error process thread2.
100004
：
Failure in starting the error process thread3.
100005
：
Failure in starting the error process thread4.
800000
：
Failure in starting the non-synchronized process.
1000001
：
Failure in starting the external communication process.
1000002
：
Failure in hand-shaking with the external communication process.
4000001
：
NT error
（
OLE server
）
4000002
：
NT error(Specifying a dispatch command)
4000003
：
Failure in learning the Vision version.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, please take a note of the error
number and contact our technical service dept. for information.
W102900 “System is closing all processes. And getting into the shut-down
process. Are you sure?”
[Cause] All the programs currently running are aborted and WindowsNT starts the
shut-down session.
[Treatment] Please press ‘Yes’ to end the system. If you do not want to finish the system,
please press ‘No’.
E105010 “Fatal error occurred in constructing memory structure. Abort the
process”
[Cause] A critical error occurred while saving or initializing the system memory.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
W105110 “The saving program has no name. Please put the name?”
[Cause] The program to save does not have a name yet. It has a temporary name
(UNTITLED) now.
41
[Treatment] Please name the file before saving it.
W105120 “The same named file exists. Do you want to overwrite the file?”
[Cause] There is a file which has the same name as your file in the directory that you are
trying to save your file in.
[Treatment] When you do not need to rename your file, press ‘OK’. If you need to save your
file with a different name, press ‘Cancel’ and rename the file.
E106010 “Failed to start the data-manager. Abort the process”
[Cause] Failed to start the Data Manager.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that Machine
Information Database, Machine Control Data file, Flash Memory for saving
Control Data, or NT registry setting has a problem.
Please take a note of the error number and contact our technical service dept. for
information.
W106020 “Illegal password. Retrieve the default group settings”
[Cause] When changing the user level, the password was wrong.
[Treatment] Please enter the right password in the User level setting again.
If you do not remember your password, please take a note of the error number
and contact our technical service dept. for information.
E107100 “Failed to create asynchronous threads. Abort the process”
[Cause] Failed to start the non-synchronized process.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E108010 “Failed to start up MC system. Abort the process”
[Cause] Failed to start MC (Machine Control System).
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, something is wrong with XMP board
or other connectors.
Please take a note of the error number and contact our technical service dept. for
information.
42
E109110 “Fatal error occurred in constructing axes structure. Abort the
process”
[Cause] An error occurred in the process of creating axis structure that meets the
machine hardware.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken.
Please take a note of the error number and contact our technical service dept. for
information.
E109120 “Fatal error occurred in initializing axes. Abort the process”
[Cause] An error occurred while starting the Axis Control process.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that a system file
is broken or that something is wrong with XMP board or other connectors. .
Please take a note of the error number and contact our technical service dept. for
information.
E109130 “Failed to originate, Please retry”
[Cause] An error occurred during the Home returning process.
?
：
Detailed code
-1
：
An error of the axis process
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility that something is
wrong with the axis.
Please take a note of the error number and contact our technical service dept. for
information.
E109210 “Failed to initialize DTS”
[Cause] An error occurred during the Home returning of DTS.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility of DTS failure, Air
pressure failure, or Feeder knock-pin failure.
Please take a note of the error number and contact our technical service dept. for
information.
E109220 “Error was detected in checking if any nozzles attached”
[Cause] An error occurred while checking the nozzle installation.
[Treatment] Please turn on the power supply of the machine after finishing everything and
shutting down the machine.
If the error occurs even after the rebooting, there is a possibility of the laser
failure or the axis failure.
Please take a note of the error number and contact our technical service dept. for
information.