KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第881页
76 E397001 “Memory allocation error” [Cause] T he work ing space c an not be saved. [Treatm ent] Please add som e m ore m em or y available to save the work ing spac e. E397002 “Shared memory open error” [Cause] T he sha…
75
I318011 “Set online for MTC”
[Cause] Failed to draw shuttle out from MTC since MTC was not online.
[Treatment] Please make MTC online.
I318021 “Set online for MTS”
[Cause] MTS was not online.
[Treatment] Please make MTS online.
I318022 “Please close the door of MTS”
[Cause] Failed to draw a tray out from MTS since MTS door was open.
[Treatment] Please close the MTS door.
I318023 “Remove the PWB on Conveyor”
[Cause] A PWB was detected on the conveyor.
[Treatment] Please removed the PWB on the conveyor.
76
E397001 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E397002 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
E397011 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
E397012 “Servo is in the free state”
[Cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.
77
E398001 “Memory allocation error”
[Cause] The working space can not be saved.
[Treatment] Please add some more memory available to save the working space.
E398002 “Shared memory open error”
[Cause] The shared memory could not be opened.
[Treatment] Please contact our technical service dept. for information.
E398011 “There is no input character”
[Cause] There was no character when you hit Enter key to define characters.
[Treatment] Please enter characters.
E398012 “Input character has irregularities”
[Cause] The letter strings had irregularities when defining the input.
[Treatment] Please enter proper characters.
E398013 “Input value exceeds predetermined data range. (Data range:%d
- %d)”
[Cause] The value when defining the input exceeded the input range. ?: Input range
[Treatment] Please enter the values that are within the range.
W398021 “Return to home has not yet been completed”
[Cause] The axis can not move until Home returning has been complete.
[Treatment] Please press the ORIGIN switch to perform Home returning.
W398022 “Servo is in the free state”
[cause] The axis could not move since the servo is in the free status.
[Treatment] In order to move the axis, please press the Servo Free switch to lock the servo.
W398031 “There is WB on conveyor. Remove the PWB”
[Cause] A PWB was detected on the conveyor.
[Treatment] In order to move the axis, please remove the PWB from the conveyor.
W398041 “MTC power off”
[Cause] The power supply of MTC is off.
[Treatment] Please turn on the power supply of MTS.
W398042 “MTC offline”
[Cause] MTC is not online.
[Treatment] Please make MTS online.