KE2010.Instruction Manual.Ver.2.01,Rev.08.pdf - 第3页
E0120K101AA Revision Date 00 08.2000 01 11.2000 02 03.2001 03 04.2001 04 06.2001 05 08.2001 06 10.2001 07 04.2002 08 06.2003 ● Specifications are subj ect to be chang ed without notice.
(1) This manual or software may not be copied or reproduced (duplicated), in whole or part,
without the express prior written consent of JUKI Corp.
(2) This manual is subject to change without notice.
(3) This manual is written as carefully as possible. However, if you have a question,
or find a mistake or missing information, contact our dealers or JUKI Corp.
(4) JUKI Corp. is not responsible for any defects or malfunction due to your abnormal
operation.
Im
p
ortant
E0120K101AA
Revision Date
00 08.2000
01 11.2000
02 03.2001
03 04.2001
04 06.2001
05 08.2001
06 10.2001
07 04.2002
08 06.2003
● Specifications are subject to be changed without notice.
I
Warning
For the safe operation of machinery!!
All personnel engaged in the operation of the chip placer and its accessories (here after
referred to as "machines") including the operators, service and maintenance personnel are
required to read through this safety warning to make familiar with its handling to prevent
accidents and injuries.
This "Warning: For the safe operation of machinery" instructions contain aspects that are
not included in the instruction sheet attached to the product.
The following symbols are used throughout this instructions and on the product for the better
understanding of various warning labels. Please make yourself familiar with the contents
and act accordingly.
1) Danger levels
Dangerous
Parts of machinery the negligence or mishandling of which
committed during the operation, maintenance or other services on
such parts will lead to severe accidents involving serious personal
injuries or even death.
Warning
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation,
maintenance or other services on such parts may cause potential
danger to the personnel which may lead to injuries and/or even
death.
Attention
Parts of machinery the negligence or mishandling of which
committed, or are left unattended, during the operation,
maintenance or other services on such parts may cause the
medium-to-light level of hazards to the personnel involved.
2) Warning, prohibition and directive marks
Warning, prohibition and directives are marked with the following symbols:
Warning marks
Your hands or clothes may get
caught by the machines.
Beware of moving parts.
Contacts with them may cause
injuries.
High voltage!!
Beware of electric shocks.
Beware of hot parts.
Contacts with them may cause a
burn.
Beware of movable parts.
Contacts with them may cause
injuries.
If any load is imposed or you
lay your hand on the machine,
it may be damaged.
Directive symbols
It symbolizes a contact to a
grounding wire.
It indicates the direction of turn.