TR7600 SIII_Series_Installation_en_v_2_0_2.pdf - 第11页

Test Research, Inc . 1 TR7600 SIII Ser ies User G uide – Ins tallation 1 I NTRODUCTION This manual can be appli ed to TR7600 SIII. 1.1 Objectives After you finish reading this manual, you should be able to:  Understand …

Test Research, Inc.

1 TR7600 SIII Series User Guide – Installation

1 INTRODUCTION

This manual can be applied to TR7600 SIII.

1.1 Objectives

After you finish reading this manual, you should be able to:

 Understand requirements for the system installation.

 Prepare the system installation.

 Finish the system installation.

1.2 Overview

The whole process of installation includes:

1) System Delivery

2) Container Unpacking

3) Check Accessories

4) Uninstall Mounting Brackets

5) Install X-ray Tube

6) Install Three Color-Light Tower

7) Install Air Supply Cable

8) Install Monitor

9) Input/Output Signal Port (SMEMA)

10) Power Installation

11) Tube Warm Up

12) X-ray Radiation Measurement

Test Research, Inc.

TR7600 SIII Series User Guide – Installation 2

2 INSTALLATION PROCESS

2.1 System Delivery

 The system information is listed below:

1) The container is 115 inches long x 89 inches deep x 89 inches high (2.90m x 2.26m x

2.25m).

2) The weight of the machine is 4,000 kg (9920 pounds).

3) The total weight of the container that carries the machine and other accessories is

4,980 kg (10,979 pounds).

 The Forklift requirements are listed below:

1) A fork lift with tines at least 230 centimeters (90 inches) long and rated for lifting at

least 6,000 kilograms (13,228 pounds) is needed to unload and move the system.

2) Desired open pathway would be 97 inches high x 120 inches wide. (2.45m x 3.0m) to

allow for turns.

 Important Notes:

1) It is customer responsibility to provide services to move the system.

2) You can only insert two forks into the slots at the longer sides of the container

to move the machine out of the container.

Figure 1: Shipping Container