TR7600 SIII_Series_Installation_en_v_2_0_2.pdf - 第34页
Test Research, Inc . TR7600 SII I Series U ser Guide – I nstallatio n 24 2.12 Working Environment The Operating and St orage environmental parameters are listed in t he following table. Operating Storage A mb ient Te mpe…
Test Research, Inc.
23 TR7600 SIII Series User Guide – Installation
Figure 43: Loader and Unloader Cable
2.11.2 Linking with Unloader
SMEMA Connections
PORT2
–
DOWN LINE
X98
Black (1) / Green (2) Ready
Y106
Red (3) / Blue (4)
Board Available
Y105
Yellow (5) / White (6) OK: Short; NG: Open
Figure 44: Unloader Socket
Located below the power supply socket in the back of the equipment is I/O PORT2. Connect
the connector, and match three sets of different colored wire pairs at the other end of the
cable with the Unloader according to its specifications. The three pairs are: Black-Green
(X98) for receiving READY board request signal from the Unloader, Red-Blue (Y106) for
sending board unload signal to the Unloader and the Yellow-White (Y105) TEST PASS
signal connector. Connect the Black-Green connector with the Unloader’s connector for
sending READY board request signal. Then connect the Yellow-White connector with the
Unloader's connector for receiving TEST PASS signal. (We use the standard SMEMA signal.
If this is different due to differences in manufacturer, contact the rear stage manufacturer to
acquire the connection data.)
PIN1~PIN6
1 2 3
4 5 6 7
8 9 10 11
12 13 14
PIN1~PIN6
1 2 3
4 5 6 7
8 9 10 11
12 13 14
1 2 3
4 5 6 7
8 9 10 11
12 13 14
1 2 3
4 5 6 7
8 9 10 11
12 13 14
Test Research, Inc.
TR7600 SIII Series User Guide – Installation 24
2.12 Working Environment
The Operating and Storage environmental parameters are listed in the following table.
Operating Storage
Ambient Temperature:
0-40°C (32-104°F) -40-66°C (-40-151°F)
Max. Temperature Gradient:
10°C/hour (18°F/hour) 10°C/hour (18°F/hour)
Relative Humidity:
20-80% non-condensing Up to 95% non-condensing
Max. Humidity Gradient:
10%/hour 10%/hour
Max. Wet Bulb Temperature:
25°C (77°F) 46°C (115°F)
Max. Dew Point Temperature:
2°C (36°F) 2°C (36°F)
Figure 45: Operating & Storage Environment for TR7600 SIII
Test Research, Inc.
25 TR7600 SIII Series User Guide – Installation
2.13 Power Installation
Machine Power: 200~240V 3-Phase, 50/60 Hz 7 kVA.
Please confirm the power used at the customer facility.
Please confirm whether the optional 3-phase transformer is necessary or not with TRI
sales representative or FAE.
The machine will be shipped with a 4-prong plug although the power is a 3-wire
connection. The extra pin is connected to the grounding wire.
The plug type is LK6420.
Figure 46: Plug Type
Grounding
In order to use the machine safely, the power source must have a grounding wire
to protect the equipment. If the equipment is damaged due to missing grounding,
the damage will not be covered by the warranty. Users will be responsible for the
damage.
3-phase wires
The system coming from the factory will have an approximately 6 foot long 4-wire
cable. The cable is connected to the designated phase terminal like R-S-T, L1-L2-
L3, or X-Y-Z on the connector. This 3-phase system doesn’t define a phase
sequence, so phase rotation will make no difference at all. The phase difference
of R-S-T is 120V. Different countries may use different colors to present R-S-T
wires. However, a green wire or yellow-green wire is often used to represent the
grounding wire.