TR7600 SIII_Series_Installation_en_v_2_0_2.pdf - 第25页

Test Research, Inc . 15 TR7600 SIII Ser ies User G uide – Ins tallation 4) U ninstall the mounting brackets of the upper X-Y table. Figure 25: Uninstall Mounting Brackets 5) F rom the rear view o f the machine, you can s…

Test Research, Inc.

TR7600 SIII Series User Guide – Installation 14

Figure 23: Uninstall Mounting Brackets

Open the rear door and uninstall the tube mounting bracket.

Figure 24: Uninstall the Mounting Bracket

Test Research, Inc.

15 TR7600 SIII Series User Guide – Installation

4) Uninstall the mounting brackets of the upper X-Y table.

Figure 25: Uninstall Mounting Brackets

5) From the rear view of the machine, you can see the items listed below.



1 mounting bracket on the tube X axis.



2 types of brackets on the lower Y axis. Each bracket type has 2 pieces.



2 types of

hexagonal screws. One type has 4 hexagonal screws (M5x12 NI) and the

other type has 12 hexagonal screws (M6x16 NI).



types of gaskets

. One type has 4 gaskets (M5 NI 5.3x10x1) and the other type

has 12 gaskets (M6 NI 6.4x12x1.6).

Please uninstall these items. Keep the screws and gaskets with the brackets and do not

screw them back to the machine.

Figure 26: Release These Two Screws First

6) There are a total of 10 mounting brackets and 36 screws and 36 gaskets. Please put

them in a plastic bag and keep them for future use.

Test Research, Inc.

TR7600 SIII Series User Guide – Installation 16

2.5 Install X-ray Tube

1) Carefully remove the X-ray tube from its packing carton. Avoid dropping or bumping the

unit.

Figure 27: X-Ray Source

2) Mount the X-ray tube on the upper X-Y table. Sockets on the X-ray tube should face the

left side of the machine.

3) Fasten the four screws shown in the figure below.

Figure 28: X-Ray Tube Screws

4) Connect the system cables to the tube’s sockets.