00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第20页
Power up, initialise and Power down 20 www.dek.com Question Q1. Which product file is loaded by default when the machine is first powered on?
Power up, initialise and Power down
19
www.dek.com
4 Power up, initialise and Power down
Reference: Machine Operator manual
The screen printer has a specific power up and power down sequence that should be followed in order to ensure error
free performance and to ensure that data is not lost or corrupted. Switching power off and then on again is also a method
of recovering
from certain error messages.
Preparation
Whilst referring to the procedures in your machine operator manual, observe as your instructor demonstrates the correct
method of powering on, initialising and then powering off the machine.
Demonstration
⃞ Power on the machine ensuring first that the following conditions have been met:
⃞ Mains voltage is present on the machine
⃞ Compressed air is present on the machine
⃞ All circuit breakers are on
⃞ All covers are closed (and print head is down if appropriate)
⃞ All e-stops are out
⃞ Initialise the machine
⃞ Power down the machine
Power up, initialise and Power down
20
www.dek.com
Question
Q1. Which product file is loaded by default when the machine is first powered on?
Pre-production checks -
21
www.dek.com
5 Pre-production checks
Reference: Operator best working practices manual
It is important to ensure that the Printer and peripherals are in a suitable condition for production. This involves
performing a quick visual check in and around the printer.
Preparation
Tick off each of the following items as you complete them:
⃞ Refer to the BWP manual and identify the items on and around your printer which should be inspected prior to
production starting
⃞ Complete the table below listing these items and highlighting the checks that should be made
Item of Hardware Checks to be made
TCM / ECM
Vacuum Unit