00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第21页
Pre-production checks - 21 www.dek.com 5 Pre-production checks Reference: Operator best working practices manual It is important to ensure that the Printer and peripherals are in a suitable condition for production. This…
Power up, initialise and Power down
20
www.dek.com
Question
Q1. Which product file is loaded by default when the machine is first powered on?
Pre-production checks -
21
www.dek.com
5 Pre-production checks
Reference: Operator best working practices manual
It is important to ensure that the Printer and peripherals are in a suitable condition for production. This involves
performing a quick visual check in and around the printer.
Preparation
Tick off each of the following items as you complete them:
⃞ Refer to the BWP manual and identify the items on and around your printer which should be inspected prior to
production starting
⃞ Complete the table below listing these items and highlighting the checks that should be made
Item of Hardware Checks to be made
TCM / ECM
Vacuum Unit
Pre-production checks -
22
www.dek.com
Item of Hardware Checks to be made
Board Clamps
Rising Table
Consumables
Demonstration
Having completed the preparation phase, now complete the actions below. Tick off each item as you complete them:
⃞ Using the BWP manual as a guide perform the pre-production checks