00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第26页
Pepare the machine for production 26 www.dek.com ⃞ Load print material manually or… ⃞ Load print material using auto dispenser (if available) If you are using ProFlow ….. ⃞ Fit ProFlow ⃞ Load cassette (if applicable) ⃞ F…
Pepare the machine for production
25
www.dek.com
6 Pepare the machine for production
Reference: Machine Operator manual, ProFlow best working practices manual
Preparing the machine for production involves a step-by-step sequence. Following the correct sequence will ensure quick
and trouble free product changeovers.
Preparation
Tick off each of the following items as you complete them:
⃞ Whilst discussing the best method of preparing the printer with your instructor review the set up procedures in your
machine operator manual
Demonstration
Given a complete set of production hardware and using the operator manual as a guide, setup the printer ready for
production. Complete the steps in the following order and tick off each item as you complete them:
⃞ Log on
⃞ Load an existing product file
⃞ Setup tooling
If you are using squeegees …..
⃞ Fit squeegees
⃞ Perform squeegee height calibration
⃞ Load a stencil
Pepare the machine for production
26
www.dek.com
⃞ Load print material manually or…
⃞ Load print material using auto dispenser (if available)
If you are using ProFlow …..
⃞ Fit ProFlow
⃞ Load cassette (if applicable)
⃞ Fill re-chargeable head (if applicable)
⃞ Load stencil
⃞ Prime ProFlow
Inspect condition of process hardware -
27
www.dek.com
7 Inspect condition of process hardware
Reference: Operator best working practices manual
Prior to using any process hardware it should inspected to ensure it is fit for function. i.e. Clean and free from damage
and it is the correct specification as defined by the process design.
Failure to do this may result in machine error messages and print defects.
Preparation
Tick off each of the following items as you complete them:
⃞ Review each process hardware section of the best working practices manual
Demonstration
Given a selection of process hardware and with reference to the BWP manual perform the following actions. Tick off each
one as you complete them:
⃞ Select the appropriate hardware for the product file to be printed.
⃞ Inspect the hardware to ensure it is fit for function
⃞ Load the hardware in the machine