00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第27页
Inspect condition of process hardware - 27 www.dek.com 7 Inspect condition of process hardware Reference: Operator best working practices manual Prior to using any process hardware it should inspected to ensure it is fit…
Pepare the machine for production
26
www.dek.com
⃞ Load print material manually or…
⃞ Load print material using auto dispenser (if available)
If you are using ProFlow …..
⃞ Fit ProFlow
⃞ Load cassette (if applicable)
⃞ Fill re-chargeable head (if applicable)
⃞ Load stencil
⃞ Prime ProFlow
Inspect condition of process hardware -
27
www.dek.com
7 Inspect condition of process hardware
Reference: Operator best working practices manual
Prior to using any process hardware it should inspected to ensure it is fit for function. i.e. Clean and free from damage
and it is the correct specification as defined by the process design.
Failure to do this may result in machine error messages and print defects.
Preparation
Tick off each of the following items as you complete them:
⃞ Review each process hardware section of the best working practices manual
Demonstration
Given a selection of process hardware and with reference to the BWP manual perform the following actions. Tick off each
one as you complete them:
⃞ Select the appropriate hardware for the product file to be printed.
⃞ Inspect the hardware to ensure it is fit for function
⃞ Load the hardware in the machine
Inspect condition of process hardware - Room for Your Sketches and Notes
28
www.dek.com
Room for Your Sketches and Notes