00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第31页
Run Printer in production 31 www.dek.com Reference: Machine Operator manual The first few boards printed in the production run will highlight any problems with the setup of the printer or process hard- ware. It is import…
Run Printer in production
30
www.dek.com
Q2. When the squeegee print stroke is from back to front ensure that:
Run Printer in production
31
www.dek.com
Reference: Machine Operator manual
The first few boards printed in the production run will highlight any problems with the setup of the printer or process hard-
ware. It is important to observe carefully at this stage any problems that may lead to error messages or defective prints.
Preparation
Tick off each of the following items as you complete them:
By following the procedures in the operator manual and with assistance from your instructor
⃞ Set a batch limit and zero batch count
⃞ Perform a manual paste knead operation
Questions
Q1. List two situations when a batch limit would be used in production
A1.
Q2. List three occasions when a paste knead should be performed?
A2.
Demonstration
Having completed the preparation phase, perform the following tasks:
⃞ Cycle at least ten boards through the printer
⃞ Ensure that there are no machine error messages
Run Printer in production
32
www.dek.com
⃞ Ensure that printed boards are free from print defects
Questions
Complete these sentences:
Q3. When the squeegee / ProFlow print stroke is from front to back monitor the stencil to ensure that:
Q4. When the squeegee print stroke is from back to front ensure that: