00198565- 01_Operation_Manual_DEK_Micron_EN.pdf - 第9页
Safety - WARNINGS PROHIBITIONS AND CAUTIONS 9 www.dek.com NOTICE NOTE Some of the warning symbols below may not be applicable to your machine. Symbol Definition PROHIBITION ELECTROMAGNETIC FIELD. AN ELECTROMAGNETIC FIELD…
Safety - HAZARDOUS AREAS
8
www.dek.com
1.3 HAZARDOUS AREAS
1.4 WARNINGS PROHIBITIONS AND CAUTIONS
The warning, prohibition and caution notices below are fitted to the machine and shown in the relevant procedures within
this manual.
Safety - WARNINGS PROHIBITIONS AND CAUTIONS
9
www.dek.com
NOTICE
NOTE
Some of the warning symbols below may not be applicable to your machine.
Symbol Definition
PROHIBITION
ELECTROMAGNETIC FIELD. AN ELECTROMAGNETIC FIELD EXISTS WITHIN THE MACHINE FROM THE LINEAR MOTORS. THIS
MAY PRESENT A HAZARD TO PEOPLE FITTED WITH AN IMPLANTED CARDIAC DEVICE. THE MOTOR MANUFACTURER
RECOMMENDS A SAFE DISTANCE OF AT LEAST 15MM.
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE VICINITY OF THE LINEAR MOTORS THAT MAY ACT
UPON FERROUS OBJECTS WHOSE MOVEMENTS COULD LEAD TO PERSONAL INJURY AND/OR DAMAGE TO THE MACHINE.
PROHIBITION
STRONG MAGNETIC FIELD. A STRONG MAGNETIC FIELD EXISTS IN THE VICINITY OF THE LINEAR MOTORS THAT
REPRESENT A SERIOUS HAZARD TO PEOPLE FITTED WITH METALLIC IMPLANTS.
PROHIBITION
MACHINE COVERS. IN ORDER TO PROTECT PERSONNEL AND TO PREVENT DAMAGE TO THE MACHINE, COVERS ARE
FITTED TO THE MACHINE FRAME. THESE PANELS MUST ONLY BE REMOVED BY SUITABLY QUALIFIED PERSONNEL.
WARNING
MOVING PARTS. MOVING PARTS ARE PRESENT IN THE VICINITY OF THIS WARNING LABEL, THESE PARTS HAVE THE
POTENTIAL TO CAUSE INJURY.
WARNING
BOARD CLAMPS. EXTREME CARE MUST BE EXERCISED WHEN WORKING IN THE TOOLING AREA OF THE MACHINE TO
AVOID INJURY. THE FOILS ON THE FRONT AND REAR BOARD CLAMPS ARE VERY SHARP.
Safety - WARNINGS PROHIBITIONS AND CAUTIONS
10
www.dek.com
Symbol Definition
WARNING
SOLVENT SPRAY. THE UNDERSTENCIL CLEANER SPRAYS A FINE JET OF SOLVENT SOLUTION ON TO THE CLEANER.
APPROVED PROTECTIVE CLOTHING SHOULD BE WORN.
CAUTION
RECOMMENDED SOLVENTS. ANY SOLVENTS USED MUST COMPLY WITH LOCAL ENVIRONMENTAL GUIDELINES. ASM
RECOMMEND USING SOLVENTS THAT ARE ENVIRONMENTALLY FRIENDLY, IE CFC FREE AND WATER BASED. SOLVENTS
USED MUST HAVE FAST EVAPORATION RATES AND FLASHPOINT SPECIFICATIONS GREATER THAN 39°C.
CAUTION
SOLVENT SOLUTION. DO NOT MIX SOLVENT SOLUTIONS. FLUSH THE SOLVENT TANK THOROUGHLY WHEN CHANGING TO A
DIFFERENT SOLVENT SOLUTION.
CAUTION
HANDLING SOLVENT AND SOLDER. WHEN USING OR HANDLING ANY SOLDER PASTE OR SOLVENT FORMULATION THE
MANUFACTURERS’ SAFETY DATA SHEETS MUST BE STRICTLY ADHERED TO.
CAUTION
TOXIC CHEMICALS MAY BE PRESENT. WEAR EYE PROTECTION.
CAUTION
TOXIC CHEMICALS MAY BE PRESENT. WEAR SAFETY GLOVES.