SOM-1651-002.pdf - 第13页

12 Tg0754-PM-SO (6) The recycle conveyor is automatically moved, pitch by pitch, so that the discharged component is not piled on the previously discharged component. (7) Press the [MANUAL] switch to check the driving of…

11 Tg0754-PM-SO0206-001

5.2 Performance Check

(1) Set the component library data.

(2) Display the "Component Recognition Test" operation window.

Fig. 4 "Component Recognition Test" Operation Window

(3) Set the test ID, etc.

(4) Select [Pick From Fdr (Mnl)] or [Pick From Fdr (Auto)].

(5) Select [Comp. Collection].

The placement head reduces the automatic operation speed by

95% and discharges the component.

The stop time of the head during the component discharge is the

same as that of the component placement in the automatic

operation.

• When [Rejected Component Discharge Position] is set to

"AUTO", the component is discharged on the recycle conveyor

or in the component storage box (small).

• When [Rejected Component Discharge Position] is set to

"Recycle Conveyor", the component is discharged onto the

recycle conveyor. In that case, proceed to step (4).

12 Tg0754-PM-SO

(6) The recycle conveyor is automatically moved, pitch by pitch, so

that the discharged component is not piled on the previously

discharged component.

(7) Press the [MANUAL] switch to check the driving of the recycle

conveyor, if required.

Refer to "Section 6, 3.2 "Component Recognition Test"

Tab" in Volume 2 : Operation (Supervisor) in the Instruc-

tion Manual for the main machine.

Note

0206-001

5.2 Performance Check

13 Tg0754-PM-SO0206-001

6. Component Removal Procedure

6.1 Rejected Components on Recycle Conveyor

• Remove the components on the recycle conveyor before it is filled

fully with the components.

Operation Procedure

(1) Press the [MANUAL] Switch.

The recycle conveyor continues to be driven as long as the

[MANUAL] switch is ON.

(2) When the component is moved outside the safety door, remove

it by hand.

(a) When the recycle conveyor is driven automatically,

the [MANUAL] switch is not available.

(b) If the recycle conveyor gets filled with components,

an error indication appears and the [MANUAL]

switch becomes unavailable. Refer to "8.2 Trouble-

shooting after "Error" Window (Error ID)" for details.

Note