SOM-1651-002.pdf - 第9页

8 Tg0754-PM-SO 0206-001 3.2 Installation Position 3.2 Installation Position Recycle Conveyor B Component Storage Box (Small) B Multi-Layer T ray Feeder (Option) (Front Side of Machine) Fig. 2 T op View

7 Tg0754-PM-SO0206-001

3.1 Rough View and Names

*4 [MANUAL] Switch

This [MANUAL] switch operates the recycle conveyor.

It is used when the component discharged by the head is removed.

*5 LOCK Lever

This lever is used to lock the recycle conveyor.

*6 Component Storage Box (Small)

Components with the size of 10 × 10 mm or less are stored in the

box by a setting on the component library data.

*7 Recycle Conveyor Component Discharge Position Detec-

tion Sensor (-BPH651)

This sensor detects whether or not the component is discharged

normally on the recycle conveyor.

*8 Conveyor Belt

This conveyor belt transfers the components to the operator side.

*9 Recycle Conveyor Component Full Detection Sensor

(-BPH652)

This sensor detects whether or not the conveyor surface has been

filled with components.

8 Tg0754-PM-SO0206-001

3.2 Installation Position

Recycle Conveyor B

Component Storage Box

(Small) B

Multi-Layer Tray Feeder

(Option)

(Front Side of Machine)

Fig. 2 Top View

9 Tg0754-PM-SO0206-001

4. Scope of Actions

(1) When a component recognition error, etc., occurs and the

picked up component is unplaceable, the component discharge

operation starts.

(2) According to the component library data, the placement head is

moved on the recycle conveyor or component storage box

(small), and it releases the picked up component. After that, the

placement head returns to normal placement operation.

(3) The component discharge operation is started at the specified

component discharge position.

• When the component is discharged on the recycle conveyor,

proceed to step (4).

• When the component is discharged in the component storage

box (small), the component discharge operation is completed.

(4) The recycle conveyor moves by 1 pitch so that the component

discharged on the conveyor is not piled on top of the previously

discharged component.

(a) The discharge position varies according to the instruc-

tion in "Component Discharge Position" in the compo-

nent library.

When [Recycle Conveyor] is selected, all components

are discharged on the recycle conveyor.

When [Auto] is selected, only components of 10 × 10

mm or less are discharged in the component storage

box (small), and other components are discharged on

the recycle conveyor.

(b) A single pitch of the recycle conveyor for transferring

the component automatically varies, depending on the

component size X, Y, in component library.

Note