SOM-1756-001.pdf - 第10页

6. Pallet with T ag Memory (Select Option) 6 . Pallet with T ag Memory (Select Option) • The pallet with a tag memory can be used for the multi-layer tray feeder made exclusively for such a pallet. The data is automatica…

5. ACV System

In ACV system, the data including the number of components used for

each feeder can be managed integrally in the server.

The production history and component use state can be traced by reg-

istering the ACV terminal name and the operator name.

The ACV system can be used combining the following specially de-

signed functions. For the combination, contact our marketing depart-

ment or sales agency.

Table 4

Special Specifications Name Remarks

ACV System for ACV System for TCM-X Series C-S368-01:

TCM-X Series TCM-X110,210,300(D)

C-S368-02:

TCM-X100,200,300

Specially for ACV System Feeders

• Tape Feeder with Tag Memory

• Dual Tape Feeder with tag Memory

• Bulk Feeder with Tag Memory

ACV System for ACV System for TIM-X Series I-S162-01

TIM-X Series Specially for ACV System Feeders

• Tape Feeder with Barcode Label

• Pallet with Barcode Label

(Multi-Layer Tray Feeder)

• Pallet with Tag Memory I-S162-02

(Multi-Layer Tray Feeder) (Select Option)

ACV Terminal PC for ACV Terminal* These are also in com-

Software mon use in NT-100.

ACV Terminal ACV Terminal Software NP01102

Barcode Scanner*

Label Printer*

Barcode Label / Ink Ribbon*

ACV Server Software ACV Line Server*

ACV Line Server ACV Control Server*

Backup Device*

ACV Server Software NP01101

Uninterruptive Power Supply*

- LAN Connection Kit (HUB)*

Note : Prepare for the * -marked devices on the customer side.

5. ACV System

0311-001 8 AIT01EGP

6. Pallet with Tag Memory (Select Option)

• The pallet with a tag memory can be used for the multi-layer tray

feeder made exclusively for such a pallet.

The data is automatically read from the tag memory or write to it

through the antenna on the traverse.

• A tag memory can be attached to a pallet, making it possible for the

pallet to be used exclusively for the ACV system.

Fig. 2

Tag Memory

0311-001 9 AIT01EGP

7. Outline of Actions

(1) Install the feeder for which the procedures related to "Registration

of Component Data" and "Linkage between Components and

Feeder" are completed.

Refer to the instruction manual of "ACV Terminal" for the detailed

information on "Registration of Component Data" and "Linkage be-

tween Components and Feeder".

(2) The procedure to check for wrong installation of a feeder should be

taken manually for each feeder.

The ACV data is checked for all feeders used for the current pro-

duction model. If no error is found, the machine keeps on working.

When the ACV data is checked in advance at the "ACV

Check Status" tab sheet, no checking operation is per-

formed at starting time of the machine.

• When a feeder is not installed correctly on the feeder base or a

feeder has caused a component shortage error, the machine in-

dicates the error and stops running.

(3) Press the [START] button on the operation panel. The automatic

operation starts.

• When an error is detected after all feeders are checked, the ma-

chine stops immediately in an error condition and an error mes-

sage is issued.

• All feeders are checked before the machine is restarted ([START]

Button "ON") after all feeders are checked once completely with-

out any error being found and the automatic operation is stopped.

• When the machine has stopped in an error condition due to wrong

installation of a feeder, the operation becomes available after the

feeder is correctly set in position.

[Pallet with Tag Memory (Option Selected)]

• When the machine is restarted, the ACV data is checked for all tray

pallets.

7. Outline of Actions

Note

0311-001 10 AIT01EGP