00196849-02 OG SIPLACE Operation of X and SX-Series without SSC (SW70x).pdf - 第4页

4 Inhaltsverzeichnis 2.5 SIPLACE SX-Series mac hine ty pes 33 2.6 SIPLACE SX-Series machine setup 34 2.7 SIPLACE SX-Series machine setup 35 2.8 SIPLACE placement hea ds and conveyor typ es 36 2.9 SIPLACE feeder modules 3…

Operator Guide SIPLACE Operation of X and SX-Series with SSC

Inhaltsverzeichnis

Table of Contents

1 Machine Safety (70x) 15

1.1 Warning Labels - General 15

1.2 Warning Labels - Permanent Magnets 16

1.3 Warning Labels - Tape Cutters 17

1.4 Warning Labels - Lasers 18

1.5 High temperatures related to CP20 head and X feeders. 19

1.6 High temperatures related to Head Control Unit. 20

1.7 Buttons and switches - X-series machines 21

1.8 Safety Covers - X-series machines 22

1.9 Safety Covers – X-series machines 23

1.10 Buttons and switches - SX-series machines 24

1.11 Safety Covers - SX-series machines 25

1.12 Safety Covers – SX-series machines 26

1.13 Further Safety Information 27

2 Machine Overview (70x) 29

2.1 Basic machines in a typical SMT line setup 29

2.2 SIPLACE X-Series machine types 30

2.3 SIPLACE X-Series machine setup 31

2.4 SIPLACE X-Series machine setup 32

Inhaltsverzeichnis

2.5 SIPLACE SX-Series machine types 33

2.6 SIPLACE SX-Series machine setup 34

2.7 SIPLACE SX-Series machine setup 35

2.8 SIPLACE placement heads and conveyor types 36

2.9 SIPLACE feeder modules 37

3 Nozzles (70x) 39

3.1 Overview Head Types vs. Nozzles 39

3.2 Keep the Ceramic Nozzles Clean! 40

4 Preparing the Component Set Up 41

4.1 What makes a Set-Up? 41

4.2 Steps to prepare a product to run at the line 42

4.3 Printing Set Up Report 43

4.4 Printing Set Up Report 44

4.5 Printing Set Up Report 45

4.6 Printing Set Up Report 46

4.7 Reading / Interpreting Of The Table Set Up Sheet 47

5 Setting Up X-Feeders 49

5.1 Overview - Component Table 49

Operator Guide SIPLACE Operation of X and SX-Series with SSC

Inhaltsverzeichnis

5.2 Inserting the Feeder Module 50

5.3 Overview - Features and Controls 51

5.4 Preparing the Feeder - Inserting the spacer (Tape Support) 52

5.5 Preparing the Feeder - Removing the spacer (Tape Support) 53

5.6 Loading Feeders - Preparation of the tape 54

5.7 Loading Feeders - Inserting the tape 55

5.8 Loading Feeders - Inserting the tape 56

5.9 Loading Feeders - Inserting the Cover tape 57

5.10 Unloading Feeders - Removing a tape 58

5.11 Unloading Feeders - Removing a Feeder 59

5.12 Control panel and status display 60

5.13 8mm X - Pick-up positions 61

5.14 8mm X - Setting the Pick-up position 62

5.15 12mm X - Pick-up positions 63

5.16 12mm X - Setting the Pick-up position 64

5.17 16 - 88mm X - Correct pick-up position and setting 65

5.18 8 - 88mm X - Possible Pitch settings 66

5.19 8 - 88mm X - Setting the pitch 67

5.20 8 - 88mm X - Setting the transport speed 68

5.21 Checking the Set-Up 69

5.22 Supports for heavy component reels 70