00196849-02 OG SIPLACE Operation of X and SX-Series without SSC (SW70x).pdf - 第88页
SW 703 Downloading a Recipe - Nozzle changer setup is complete. : 88 Nozzle cha nger setup is compl ete. 1. Once the changes have been made the icons will no longer be red and you are read y to start production.
SW 703 Downloading a Recipe - Changing the nozzle changer configuration. :
87
Changing t he nozzle change r configuration.
(A) Magazine Exchange Procedure.
1. To remove – push the sprung lever down to release
the magazine.
2. Tilt the magazine back and lift up.
3. To replace – slot the back of the magazine against
the rear pins.
4. Push the magazine down until it clicks in place.
(B) Magazine garage numbering.
(C) Magazine numbers – locations 1 & 2.
(D) Magazine numbers – locations 3 & 4.
(T) Transport direction.
SW 703 Downloading a Recipe - Nozzle changer setup is complete. :
88
Nozzle changer setup is complete.
1. Once the changes have been made the icons will no
longer be red and you are ready to start production.
SW 703 Option MTC - Option - MTC :
89
SW 703 Option MTC
The next pages contain details of how to prepare the set
up of the Option Matrix Tray Changer (MTC)