00196849-02 OG SIPLACE Operation of X and SX-Series without SSC (SW70x).pdf - 第6页
6 Inhaltsverzeichnis 6 SW 703 Changing the tables 71 6.1 Changing of Table - Prep aration 71 6.2 Changing of Table – Stop Pr oduction 72 6.3 Changing of Table – move gantry. 73 6.4 SIPLACE SX – remove table 74 6.5 SIPLAC…
Operator Guide SIPLACE Operation of X and SX-Series with SSC
Inhaltsverzeichnis
5
5.2 Inserting the Feeder Module 50
5.3 Overview - Features and Controls 51
5.4 Preparing the Feeder - Inserting the spacer (Tape Support) 52
5.5 Preparing the Feeder - Removing the spacer (Tape Support) 53
5.6 Loading Feeders - Preparation of the tape 54
5.7 Loading Feeders - Inserting the tape 55
5.8 Loading Feeders - Inserting the tape 56
5.9 Loading Feeders - Inserting the Cover tape 57
5.10 Unloading Feeders - Removing a tape 58
5.11 Unloading Feeders - Removing a Feeder 59
5.12 Control panel and status display 60
5.13 8mm X - Pick-up positions 61
5.14 8mm X - Setting the Pick-up position 62
5.15 12mm X - Pick-up positions 63
5.16 12mm X - Setting the Pick-up position 64
5.17 16 - 88mm X - Correct pick-up position and setting 65
5.18 8 - 88mm X - Possible Pitch settings 66
5.19 8 - 88mm X - Setting the pitch 67
5.20 8 - 88mm X - Setting the transport speed 68
5.21 Checking the Set-Up 69
5.22 Supports for heavy component reels 70
6
Inhaltsverzeichnis
6 SW 703 Changing the tables 71
6.1 Changing of Table - Preparation 71
6.2 Changing of Table – Stop Production 72
6.3 Changing of Table – move gantry. 73
6.4 SIPLACE SX – remove table 74
6.5 SIPLACE X – remove table 75
6.6 Changing of Table - remove 76
6.7 SIPLACE SX – reload table 77
6.8 SIPLACE X – reload table 78
7 SW 703 Downloading a Recipe 79
7.1 LC GUI – Most Important Buttons 79
7.2 Download of a Recipe. 80
7.3 Download Complete. 81
7.4 Change conveyor width – remove support pins. 82
7.5 Successful Recipe Sent 83
7.6 Unsuccessful Recipe Send 84
7.7 Changing the nozzle changer setup. 85
7.8 Changing the nozzle changer setup. 86
7.9 Changing the nozzle changer configuration. 87
Operator Guide SIPLACE Operation of X and SX-Series with SSC
Inhaltsverzeichnis
7
7.10 Nozzle changer setup is complete. 88
8 SW 703 Option MTC 89
8.1 Option - MTC 89
8.2 Numbering System Of Levels (Towers 1 & 2) 90
8.3 Numbering System Of Levels (Towers 1 & 2) 91
8.4 Removal Of Carriers for both Towers 92
8.5 Loading Of Carrier for both Towers 93
8.6 Loading Position Of The Carrier (Tower 1) 94
8.7 Loading Position Of The Carrier (Tower 2) 95
8.8 Magnets Under The Carrier 96
8.9 Locking Of The Leaf Springs (Towers 1 & 2) 97
8.10 Filling MTC 98
8.11 Set Up Sheet for MTC 99
8.12 Filling the MTC 100
8.13 Moving to the Refill position 101
8.14 Refilling the Trays 102
8.15 Refill Completed 103
8.16 Checklist for MTC Preparation. 104
9 SW 703 Option WPC 105