Specification SIPLACE CA-Series2011版.pdf - 第61页
61 Option List Placement Machine Available options CA4 CA3 Notes Waffle pack tray holder SIPLACE X series X X C an be used at locations 2 and 4 but only with the SIPLACE X series component trolleys; not in combination wi…
60
Option List
Placement Machine
Available options CA4 CA3 Notes
PCB alignment, single conveyor X X
PCB alignment, dual conveyor X X
Long board X X
Mechanical stopper X X
Multicolor PCB camera, type 24, digital X X
1D PCB barcode scanner X X
2D PCB barcode scanner X X
PCB barcode scanner assembly kit X X
Magnetic pin support X X
20 segment Collect&Place CA head X X In the two-gantry area, only in combination
with another 20 segment Collect & Place CA
head
01005 components X X
12 segment Collect&Place head X X
High-resolution component camera, type 29
for C&P12
XX
Component sensor C&P12 X X
0201 package X X
6 segment Collect&Place head X X
TwinHead X X Only possible in placement area without
SWS
High-Force Head X X Only possible in placement area without
SWS
Stationary component camera, type 25, 16
x 16, digital
X X For the TwinHead or High-Force Head only
Vision teach station X X
Coplanarity module – X For the TwinHead or High-Force Head at
location 3 only
3D coplanarity module – X For the TwinHead or High-Force Head at
location 3 only
Nozzle Changers X X Depending on the placement head
Sensor for the component reject bin X X
Component Trolley for SIPLACE X-Series X X
Splice detection for X feeder modules X X
61
Option List
Placement Machine
Available options CA4 CA3 Notes
Waffle pack tray holder
SIPLACE X series
X X Can be used at locations 2 and 4 but
only with the SIPLACE X series component
trolleys; not in combination
with the C&P20 CA placement
head
Support for an additional tape reel
SIPLACE X-series
XX
Feeder adapter for X series X X S linear vibratory feeders and label presenter
modules can be set up on component
trolleys for the SIPLACE X series using
this adapter.
Linear Dipping Unit (LDU) X X
Integrated into SWS 12 and/or on X table, although
only one LDU per location.
Feeder module cover flap X X
110/208 V conversion kit X X
Vacuum pump
a
X X Not for the TwinHead or High-Force Head
Vacuum pump connection kit X X
Productivity lift X X Maximum PCB width:
- single lane 460 mm
- double lane 216 mm
Maximum component height: 17 mm on the
underfloor section
a) Operation with vacuum pump only possible with software SR.605.03
62
Option List
SWS
Available options SWS
12
Notes
SIPLACE wafer transfer system (table: 1,3)
X
SIPLACE wafer transfer system (table: 2,4)
X
Adapter FF070 & FF 090 on standard frame FF 108
X
Adapter hoop ring 4" on FF 108
X
Adapter hoop ring 6" on FF 108
X
Adapter hoop ring 8" on FF 108
X
SIPLACE wafer expansion unit for 12" wafers
X
Wafer holder 8" for standard frame in combination with hoop
ring (table.: 1,3)
X
Wafer holder 8" for standard frame in combination with hoop
ring (table.: 2,4)
X
Wafer holder 12" for standard frame in combination with hoop
ring (table.: 1,3)
X
Wafer holder 12" for standard frame in combination with hoop
ring (table.: 2,4)
X
Wafer holder 8" for standard frame (table: 1,3)
X
Wafer holder 8" for standard frame (table: 2,4)
X
Multi needle eject system 3.5 x 3.5 mm min. needle pitch
X
Multi needle eject system 2.0 x 2.0 mm min. needle pitch
X
Component handling standard, field of view: 12 mm x 12 mm
X
Component handling small die, FoV: 5 x 5 mm, eject tool Sm.
die, component sensor
X
SIPLACE Linear Dipping Unit (LDU)
X
Integrated into SWS 12
and/or on X table, although
only one LDU per location.
Standard flux pot for LDU
X
SIPLACE CA LDU cavity plates, 20 - 400µm in 10µm steps
X
SIPLACE WS die attach unit
X
Nozzle changer C&P20
X
One bank in row 2
Nozzle changer C&P12
X
Two banks in row 1 and 2
Operating SW for ALPS
X
ALPS EL license for one to four SWS
X
ALPS wafer mapping HW (PC, keyboard, KVM switch, XP
software)
X