Specification SIPLACE CA-Series2011版.pdf - 第62页
62 Option List SWS Available options SWS 12 Notes SIPLACE wafer transfer system (table: 1,3) X SIPLACE wafer transfer system (table: 2,4) X Adapter FF070 & FF 090 on standard frame FF 108 X Adapter hoop ring 4" …
61
Option List
Placement Machine
Available options CA4 CA3 Notes
Waffle pack tray holder
SIPLACE X series
X X Can be used at locations 2 and 4 but
only with the SIPLACE X series component
trolleys; not in combination
with the C&P20 CA placement
head
Support for an additional tape reel
SIPLACE X-series
XX
Feeder adapter for X series X X S linear vibratory feeders and label presenter
modules can be set up on component
trolleys for the SIPLACE X series using
this adapter.
Linear Dipping Unit (LDU) X X
Integrated into SWS 12 and/or on X table, although
only one LDU per location.
Feeder module cover flap X X
110/208 V conversion kit X X
Vacuum pump
a
X X Not for the TwinHead or High-Force Head
Vacuum pump connection kit X X
Productivity lift X X Maximum PCB width:
- single lane 460 mm
- double lane 216 mm
Maximum component height: 17 mm on the
underfloor section
a) Operation with vacuum pump only possible with software SR.605.03
62
Option List
SWS
Available options SWS
12
Notes
SIPLACE wafer transfer system (table: 1,3)
X
SIPLACE wafer transfer system (table: 2,4)
X
Adapter FF070 & FF 090 on standard frame FF 108
X
Adapter hoop ring 4" on FF 108
X
Adapter hoop ring 6" on FF 108
X
Adapter hoop ring 8" on FF 108
X
SIPLACE wafer expansion unit for 12" wafers
X
Wafer holder 8" for standard frame in combination with hoop
ring (table.: 1,3)
X
Wafer holder 8" for standard frame in combination with hoop
ring (table.: 2,4)
X
Wafer holder 12" for standard frame in combination with hoop
ring (table.: 1,3)
X
Wafer holder 12" for standard frame in combination with hoop
ring (table.: 2,4)
X
Wafer holder 8" for standard frame (table: 1,3)
X
Wafer holder 8" for standard frame (table: 2,4)
X
Multi needle eject system 3.5 x 3.5 mm min. needle pitch
X
Multi needle eject system 2.0 x 2.0 mm min. needle pitch
X
Component handling standard, field of view: 12 mm x 12 mm
X
Component handling small die, FoV: 5 x 5 mm, eject tool Sm.
die, component sensor
X
SIPLACE Linear Dipping Unit (LDU)
X
Integrated into SWS 12
and/or on X table, although
only one LDU per location.
Standard flux pot for LDU
X
SIPLACE CA LDU cavity plates, 20 - 400µm in 10µm steps
X
SIPLACE WS die attach unit
X
Nozzle changer C&P20
X
One bank in row 2
Nozzle changer C&P12
X
Two banks in row 1 and 2
Operating SW for ALPS
X
ALPS EL license for one to four SWS
X
ALPS wafer mapping HW (PC, keyboard, KVM switch, XP
software)
X
63
Configuration List
Configuration Options CA4 CA3
PCB transport height (830, 900, 930, 950 mm) X X
Single conveyor, fixed side right X X
Single conveyor, fixed side left X X
Single conveyor: Wide board X X
21" conveyor width for the single conveyor
a
XX
Dual conveyor, fixed side right X X
Dual conveyor, fixed side left X X
Dual conveyor: Wide board X X
Dual conveyor in single conveyor mode X X
Siemens/SMEMA interface X X
a) The accuracy may be limited, depending on the PCB layout.