00198501-02_IM_711.1_R18-1_EN.pdf - 第5页
Station Software Vers io n 711.1 (R18 - 1) / Installation Manual 05/2018 Edition 5 1 Brief Descriptio n This installation manual provides in structions on inst alling the 711.1 Version ( R18 -1 ) of the station software …
4
6 Installing Coplan Computer Software or Feeder Computer Software 50
6.1 Installing the Software Directly on the Vision Computer .................................... 50
6.2 Installing the Software on the Vision Computer via a Remote Connection ........ 56
6.2.1 Requirements .................................................................................................... 56
6.2.2 Establishing a Connection to the Vision Computer ............................................ 56
6.2.3 Opening the Remote Desktop of the Vision Computer ...................................... 57
6.2.4 Installing the Software on the Vision Computer via the Remote Desktop .......... 58
7 First Booting after Installation 60
7.1 X-Series Placement Machines ........................................................................... 60
7.2 X-Series S Placement Machines ....................................................................... 60
7.2.1 X4i S Placement Machine .................................................................................. 60
7.3 SX-Series Placement Machines ........................................................................ 61
7.3.1 SX1/SX2 (V2) Placement Machine .................................................................... 62
7.3.2 SX+ Placement Machine ................................................................................... 62
7.3.3 SX4 Placement Machine ................................................................................... 62
7.4 DX-Series Placement Machines ........................................................................ 62
7.5 TX-Series (V1 and V2) Placement Machines .................................................... 63
7.6 Checking/Updating the Embedded Software ..................................................... 63
7.7 Storage Location of the Machine Files (Calibration Data etc.) ........................... 63
7.8 Necessary Calibration Steps.............................................................................. 64
7.9 Storing Calibration Data in the EEPROM .......................................................... 65
8 Modifying the Installation 66
8.1 Modifying the Station Software Installation ........................................................ 66
9 Repairing the Installation 68
9.1 Repairing the Station Software Installation ........................................................ 68
10 Troubleshooting 71
10.1 Downgrading to a Lower Station Software Version ........................................... 71
10.1.1 Uninstalling Station Software 711.1 ................................................................... 72
Station Software Version 711.1 (R18-1) / Installation Manual 05/2018 Edition
5
1 Brief Description
This installation manual provides instructions on installing the 711.1 Version (R18-1) of the station
software for SIPLACE® machines, the Coplan computer software and the feeder computer
software for SIPLACE BulkFeeder X. The Release-Tag displays in which ASM Release the current
product has been released. Example: (R18-1) –> 1. Release, 2018.
The software can be installed on the following SIPLACE placement machines:
– SIPLACE X2
– SIPLACE X3
– SIPLACE X4
– SIPLACE X4i
– SIPLACE X2 S
– SIPLACE X3 S
– SIPLACE X4 S
– SIPLACE X4 S micron
– SIPLACE X4i S
– SIPLACE X4i S micron
– SIPLACE SX1/SX2
– SIPLACE SX1/SX2 V2
– SIPLACE DX1/DX2
– SIPLACE CA4
– SIPLACE CA4 V2
– SIPLACE TX1/TX2
– SIPLACE TX2i
– SIPLACE TX2 micron
– SIPLACE TX2i micron
– SIPLACE TX1/TX2 V2
– SIPLACE TX2i V2
Additionally, this document contains information on the scope of delivery and requirements for
successful installation.
Station Software Version 711.1 (R18-1) / Installation Manual 05/2018 Edition
6
2 Scope of Delivery
2.1 Software Components
– Software SIPLACE Station 711.1 (R18-1) Basic including SIPLACE Vision Version 5.5.2
1)
All software belonging to R18-1 is available on the ASM Software Collection USB Medium
R18-1, item no. [00117883-xx]. This USB stick contains all basis product packages of R18-1.
Additionally, the individual software packages (*.iso files) contain the relevant software documents
(Installation Manuals, Software Version Descriptions, User Guides etc.).
(1)
The following standard applications are contained:
– Embedded software for conveyor
– Embedded software for axes
– Embedded software for component tables
– Embedded software for tape cutter
– Embedded software for heads
– Embedded software for vision modules
– Embedded software for I/O modules
– Embedded software for X-feeders
– Embedded software for X- adapter
– Embedded software for digital pressure regulation valve
– Embedded software for MTC2
– Embedded software for WPC5/WPC6
– Embedded software for wafer feeders
2.2 Hardware Components
– Station computer
– Coplan computer (option if 3D Coplan module is used)
– Feeder computer (option if SIPLACE BulkFeeder X is used)