00198501-02_IM_711.1_R18-1_EN.pdf - 第70页
Station Software V ersion 711.1 (R 18 - 1) / Installat ion Manual 05/2018 Edition 70 ► Enter the 8 - digit machin e identificatio n number in the MID - Nu mber entry field. ► Enter the serial number in the SerialNumber e…
Station Software Version 711.1 (R18-1) / Installation Manual 05/2018 Edition
69
The Select machine type dialog box is displayed.
Figure 9-2: Selecting machine type
► Select the machine type for which the software shall be repaired.
► Click the Next button.
The Insert MID and SerialNumber dialog box is displayed.
Figure 9-3: Inserting machine ID and serial number
Station Software Version 711.1 (R18-1) / Installation Manual 05/2018 Edition
70
► Enter the 8-digit machine identification number in the MID-Number entry field.
► Enter the serial number in the SerialNumber entry field.
► Click the Next button.
After the repaired installation has been completed, it is recommended to restart your computer for
all changes to take effect.
Station Software Version 711.1 (R18-1) / Installation Manual 05/2018 Edition
71
10 Troubleshooting
10.1 Downgrading to a Lower Station Software Version
This section describes which steps you have to attend when downgrading from the 711.x station
software version to a lower version.
There is no automatic support of downgrading the station software. To return to a lower station
software version, you have to uninstall the 711.x station software manually before you can install
the lower station software version.
► Note some information before you start downgrading the station software.
During downgrading from station software 711.x you will be asked for machine type, MID
number and serial number. These settings will not be transferred during downgrading (no
default settings!). You find this information on the station software GUI:
Figure 10-1: Example of machine information