SOM-1929-001_w.pdf - 第23页

Copying Prohibited 1 st Edition Issued Jun., 2006 Compiled and Distributed by 0606-001 Tg1423-ID-SO

Tg1423-ID-SO

5.8 "Auto Operation" Tab

0606-001

5.8 "Auto Operation" Tab

5.8.1 "Auto Operation Setup" Tab

•

Sheet Layout

When the [Auto Operation Setup] tab is pressed in the "Auto Operation" tab

sheet, the following tab sheet appears.

[1]

Fig.11 "Auto Operation Setup" Tab Sheet

•

Sheet Composition

[1] Component scraper (Z) axis

Approach level

Enables the setting of the approach level (1 to 3) for the component

scraper.

Level sdjustment [%]

Enables the setting of the level adjustment rate (1 to 100) for the

component scraper.

During automatic operation, the approach distance between the nozzle and

the component scraper is decided on the basis of the following table.

Table 3

Component Thickness 0.00 to 0.20 0.20 to 0.35 0.35 to 0.50 0.50 to 2.50

Approach Level

Lv.1

0.05 0.06 0.08 0.10

Lv.2

0.06 0.08 0.10 0.15

Lv.3

0.08 0.10 0.15 0.20

Unit : [mm]

Tg1423-ID-SO

5.8 "Auto Operation" Tab

0606-001

Approach Distance = Approach Distance for the Upper Level + (Difference

from the value in the Upper Level)

(Level Adjustment / 100)

Reference

In the case of the Approach Level: Lv.2, Level Adjustment: 70%, and

Component Thickness: 0.24 [mm], the Approach Distance would be as

follows : 0.06 + (0.08 - 0.06)

0.70 = 0.074 [mm]

Copying Prohibited1st Edition Issued Jun., 2006

Compiled and Distributed by

0606-001

Tg1423-ID-SO