SOM-1929-001_w.pdf - 第5页

2 Tg1423-ID-SO • Identifying Alert Icons : This symbol mark represents danger or prompts warning. : This symbol mark represents prohibited operations. : This symbol mark represents forced operations or instructions. • Id…

Tg1423-ID-SO

Before Use

We are grateful to you for purchasing this specially speciﬁed unit.

Before using this products, please read this instruction manual carefully to fully

understand the instructions and precautionary measures for safety purposes.

After reading through this manual, please use this manual as an occasional reference and

keep it within reach.

1. The safety precautions are expressed, using the combinations of safety

alert symbols " " and headwords such as "DANGER", "WARNING", or

"CAUTION" according to the degree of danger. Please fully understand the

meaning of each precautionary item for safety purposes.

The safety alert symbols " " are used to indicate a potential personal injury

hazard.

Please pay attention to all safety messages that follow the safety alert symbols to avoid

any possibility of injury or death.

DANGER

This indicates an imminently hazardous situation which, if not

avoided, will result in death or serious injury. This signal word is

limited to the most extreme situations.

WARNING

This indicates a potentially hazardous situation which, if not

avoided, could result in death or serious injury.

CAUTION

This indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury.

A precautionary item identiﬁed as "

CAUTION" may also lead the operator

to reach a serious result. To avert a serious result, please respect the described

cautions.

CAUTION

This indicates a potentially hazardous situation which, if not

avoided, may result in property damages.

2. This instruction manual describes items not included in the instruction manual for the

machine body. Please use this instruction manual together with the instruction manual

for the machine body.

0606-001

Tg1423-ID-SO

•

Identifying Alert Icons

: This symbol mark represents danger or prompts warning.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or instructions.

•

Identifying Icons in Manual

Notice

This icon shows an important precautionary or a regulatory item.

Note

This icon shows the descriptions for correct operations of the machine.

Reference

This icon shows the items to be referred to.

Procedure

This icon prompts the operator to follow the operational procedures.

0606-001

Contents

Page

Tg1423-ID-SO

0606-001

Before Use ............................................................................................. 1

Contents .............................................................................................. 3

1. Scope ............................................................................................. 4

2. Speciﬁcations ................................................................................. 4

3. Rough View .................................................................................... 5

4. Operation Procedure ...................................................................... 5

4.1 Preparation and Setup ............................................................ 5

4.2 Control Action and Description ............................................... 6

4.3 Other Actions .......................................................................... 7

5. Operation ....................................................................................... 8

5.1 "Zeroing" Tab .......................................................................... 8

5.2 "Others" Tab ............................................................................ 9

5.3 "Input Check" Tab ................................................................... 11

5.3.1 "Motor Cont (EB005)" Tab ............................................. 11

5.4 "Machine Prgm.Info." Window ................................................ 12

5.5 "Adj Menu" Tab ....................................................................... 13

5.5.1 Cmpnt scraper (Z) unit maintenance menu ................... 14

5.6 "Servo Alarm" Tab ................................................................... 16

5.7 "Device Offset" Tab ................................................................. 17

5.7.1 "Device Offset" Tab ........................................................ 17

5.8 "Auto Operation" Tab .............................................................. 18

5.8.1 "Auto Operation Setup" Tab ........................................... 18