00197381-04_VB_SetupCenter6.3SP2_DE_EN.pdf - 第45页
New Functions in Setup Center 6.3 Display of the Split Table SIPLACE Setup Center 6.3 SP2 45 5 5 N e w F u n c t io n s in S e t u p C e n t e r 6 . 3 New Functions in Setup Center 6.3 5.1 5 . 1 D is p la y o f t h e S p…
System Requirements
Supported Hardware
44 SIPLACE Setup Center 6.3 SP2
Supported machines
Supported feeder types
Machine
SIPLACE 80 F4, F4-6, S20; F5, F5 HM, S23
SIPLACE S25 HM, S27 HM, HS50, HS 50+, HS60, HF,
HF3
SIPLACE X2, X3, X4; D1, D2, D3, D4
SIPLACE CF, CS
SIPLACE X2, X3, X4, X4I
SIPLACE SX1, SX2, SX4, SX1 V2, SX2 V2
SIPLACE DX1, DX2, DX4
SIPLACE X4i S, X4 S, X3 S, X2 S
SIPLACE X4i S micron, X4 S micron
SIPLACE CA
NOTICE
Restrictions
Please note that the programming system SIPLACE Pro and the Setup Center station package
may limit this selection.
Feeder types
▪ All WPC types
▪ MTC 1 & 2
▪ All waffle-pack trays
▪ All standard SIPLACE tape feeders
▪ All standard SIPLACE linear feeders
▪ SIPLACE X adapters
▪ Special feeders (Road Runner, Road Runner
XLF, Multi Stick Feeder: IPTE MSF 60 AX and
IPTE MSF XL80 AX; LED Feeder TE und LED
Feeder HS)
▪ JTF-S and JTF-M Feeder
NOTICE
Restrictions
Please note that the programming system SIPLACE Pro and the hardware used may limit this
selection.
New Functions in Setup Center 6.3
Display of the Split Table
SIPLACE Setup Center 6.3 SP2 45
5
5 New Functions in Setup Center 6.3
New Functions in Setup Center 6.3
5.1
5.1 Display of the Split Table
Display of the Split Table
Purpose
Up to now, the table at a location could only be displayed as a complete table. The usage of a fixed table
(e.g. the fixed table in combination with a JTF-S/JTF-M Feeder) is now visible in the software.
Function
Example: SX12 with fixed table and JTF-S/M Feeder
5.2
5.2 Motorola Scanners MC3090 and MC3190
Motorola Scanners MC3090 and MC3190
Purpose
With version 6.3 and higher, Setup Center additionally supports the two Motorola scanners MC3090 and
MC3190.
5.3
5.3 User Interface of the Motorola Scanners in Chinese Language
User Interface of the Motorola Scanners in Chinese Language
Purpose
The user interface of Motorola scanners that are supported by ASM is available in Chinese language.
Function
If the scanner supports the display of Chinese characters (see prerequisite), the user interface at the
scanner is displayed in Chinese. The language of the Setup Center client must be set to Chinese.
NOTICE
Prerequisite
The language variant of the scanner operating system must be in Chinese Simplified. If this pre-
requisite is not met, the texts at the scanner are displayed in English.
New Functions in Setup Center 6.3
User Interface of the Motorola Scanners in Polish Language
46 SIPLACE Setup Center 6.3 SP2
5.4
5.4 User Interface of the Motorola Scanners in Polish Language
User Interface of the Motorola Scanners in Polish Language
Purpose
The user interface of Motorola scanners that are supported by ASM is available in Polish language.
Function
The user interface at the scanner is displayed in Polish. The language of the Setup Center client must
be set to Polish.
5.5
5.5 Advanced Settings for the Splice Sensor
Advanced Settings for the Splice Sensor
Purpose
Up to now, the limit for monitoring the Missing splice could be entered as a percentage value in relation
to the packaging unit size. This resulted in very small limits for small packaging units and very high limits
for big packaging units which made it difficult to find a common setting that could be used for packaging
units of different sizes. Now, it is possible to enter an absolute value in addition to the percentage. During
monitoring, the smaller value is decisive.
Function
► Open with Extras => Settings => General
► Open Settings for online setup verification.
► In Splice Monitor => Number of components for detection of missing splices, enter the required num-
ber of components.
► For detailed information, refer to the user manual "Setup Center 6.3" or the Online Help.