西门子SIPLACE HS 50-设备参数_EN.pdf - 第16页

14 Description The tape reels of the feeder mod- ules are accommodat ed in the tape container of the component changeover table. A cutter auto- matically chops up empty tape when it comes out. Feeder modules used on SIPL…

Description

SIPLACE HS-50 is equipped with

four stationary component tables,

one for each placement head. With

these four tables SIPLACE HS-50

can accommodate a total of 144

different 8 mm part numbers.

On the changeover tables tape

feeders and Bulk Case feeders

can be positioned. For safety rea-

sons tracks not in use should be

equipped with guards for feeder

locations.

Component feeders are stationary

during the placement process. This

allows for the replenishment of

both tape and bulk components

during machine operation.

For the changeover, individual

feeders or entire changeover ta-

bles can be exchanged without the

use of tools or external lifts. Job

changeover times can be dramati-

cally reduced with the use of addi-

tional feeder tables. This will allow

large set-ups to be completed off

line without impacting machine

production time

Using component bar codes with

the optional Component Bar Code

Scanner guarantees the correct

allocation of component to track.

Changeover tables are equipped

with rollers and an integrated

pneumatic lifting device which

eliminates the need of an external

lifting cart as with other equip-

ment. Exchanging the tables takes

less than 2 minutes per module.

Component Supply:

Changeover Table

Exchange of a Component Changeover Table

Mobile

Changeover

Table

Technical Data

Component feeder tables

(exchangeable)

4 tables per machine

compatible only with SIPLACE HS-50

Feeder location 12 feeders 3 x 8 mm per table =

144 tracks of 8 mm per machine

Feeder modules SIPLACE tape and bulk feeders

Accessories Tape container, waste container,

Splicing Tool

Description

The tape reels of the feeder mod-

ules are accommodated in the tape

container of the component

changeover table. A cutter auto-

matically chops up empty tape

when it comes out.

Feeder modules used on SIPLACE

are distinguished by a short cycle

time and a highly accurate pick-up

position. The feeder pitch is easily

adjustable. Thanks to the general

purpose tape feeder modules

which are equally suitable for pa-

per and blister tapes, a small range

of module types is sufficient. This

is a decisive advantage for invest-

ment and logistics. Once activated

by a signal from the component

table, the modules control the en-

tire feeder operation of the auto-

matic strip removal all by them-

selves.

The feeders series feature very

short cycle times and they can

handle tapes with 2 mm grids

(8 mm S). 8 mm S and

12 / 16 mm S are equipped

with component cover.

Component Supply:

Tape Feeder

Technical Data

Packaging Model Feeder

locations

Transport

distance

Max. Height

of component

Paper and

blister tapes

2 x 8 mm S

3 x 8 mm S

12/16 mm S

2 or 4 mm

2 mm

4 - 12 mm

2.5 mm

0.7 mm

14 mm

Blister tape 24/32 mm S 1.5 4 - 32 mm

14 mm

Tape reels Ø 7" to 19" (178 - 470 mm)

a) Fiducial for recognition of position of feeders;

b) only for 0201 and 0402;

c) adjustable in increments of 4 mm.

Tape Feeder Modules S

24 / 32 mm S

12 / 16 mm S

3 x 8 mm S

2 x 8 mm S

Description

The SIPLACE Bulk Case feeder

with 2 tracks is used to handle

components packaged in standard

bulk containers. It transports rec-

tangular and cylindrical passive

components to the pick up area of

the machine. To replenish the sup-

ply, the Bulk Cases are removed

and replaced outside the machine

eliminating stoppages for replen-

ishment.

Essentially, this feeder module

consists of a base which holds 2

feeder rails. The components are

separated and transported through

the feeder rail via compressed air.

The principle of stationary compo-

nent tables has been tried and

tested specifically with Bulk Case

components. Vibrations, which de-

veloped when other placement

methods are used may cause wear

to the components compromising

quality and reliability of the com-

ponents.

Component Supply:

Bulk Case Feeder

Technical Data

Bulk Case feeder

Packaging form Bulk Case

Feed rails for: Chip 0402 component height 0.35 mm

Chip 0402 component height 0.50 mm

Chip 0603 component height 0.45 mm

Chip 0603 component height 0.80 mm

Chip 0805 component height 0.45 mm

Chip 0805 component height 0.60 mm

Chip 0805 component height 0.85 mm

Chip 0805 component height 1.25 mm

Mini-Melf

Feeder location 1 feeder location for 2 different compo-

nent types

a) Reference mark to recognize the position of feeder.

Bulk Case Feeder