西门子SIPLACE HS 50-设备参数_EN.pdf - 第34页
32 Possible Machine Configuration PCB Tran sport Direction Right Side 1 and 2 Left Side 1 and 2 Nozzle Changer 5 Magazines with 12 Nozzle positions each Changeover Table with 12 Feeder Places e.g. for Tapes, Bulk 12-Nozz…
31
Description
Transporting
TransportingTransporting
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE
HS-50 placement machine. Forks
2.5 m long are required for a
packed machine, 2 m for an un-
packed one.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE
HS-50, make certain that the sur-
face it is placed on possesses the
required load bearing capacity.
Commissioning
CommissioningCommissioning
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
§ Monitor
§ Keyboard
§ Warning lamp
§ Component changeover tables.
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2560 mm
2380 mm
1495 mm
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor characteristics on request)
Total weight of equipped machine 3.5 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine legs
a
)
11.25 kg/cm
2
a) Worst case scenario; 6 legs per machine installed, area per leg: 104 cm
2
.
Center of Gravity of SIPLACE HS-50
PCB Transport Direction
Dimension of
Transport Box
696
X
Y
(
0
,
0
)
388
487
Foot
p
rints
All Units in mm
32
Possible Machine Configuration
PCB Transport Direction
Right Side 1 and 2
Left Side 1 and 2
Nozzle Changer
5 Magazines with
12 Nozzle positions each
Changeover Table with
12 Feeder Places
e.g. for Tapes, Bulk
12-Nozzle Collect & Place
Head
5-Section Dual Conveyor with
Automatic Width Adjustment from
50 x 50 mm
2
to 368 x 216 mm
2
(2" x 2" to 14.5" x 8.5")