西门子SIPLACE HS 50-设备参数_EN.pdf - 第33页
31 Description Transpor ting Transpor ting Transpor ting Transpor ting Use a fork l ift with a li fting force of 6 tons to move the SIPLACE HS-50 placement machine. F orks 2.5 m long are required for a packed machine, 2 …
30
Technical Data:
Dimensions and Set-Up Conditions
Values
Length 2385 mm
Width 2860 mm
Height with warning lamp 1700 mm standard height / 830 mm
1770 mm optional / 900 mm
1800 mm optional / 930 mm
1820 mm SMEMA height / 950 mm
a
Weight of basic model 2800 kg
Weight fully equipped 3500 kg
Room temperature
Humidity
Between 15° and 35°C
30 - 80%, on average not higher than
45%, so that no condensation can ever
form on the machine
Maximum noise development 74 dB
A
a) SMEMA interface can be adopted by software.
2385
Compressed Air
SIPLACE HS-50
1700
1541
800
2202
2860
with Tape
Container
PCB Conveyor Height
830
± 15 mm (standard)
900
± 15 mm (option)
930
± 15 mm (option)
950
± 15 mm (option)
SMEMA
All Units in mm
Power
Supply
Handle
to handle
PCB Transport Direction
Foot height 120 mm
2920
31
Description
Transporting
TransportingTransporting
Transporting
Use a fork lift with a lifting force
of 6 tons to move the SIPLACE
HS-50 placement machine. Forks
2.5 m long are required for a
packed machine, 2 m for an un-
packed one.
Pick the machine up with the fork
lift at the locations especially de-
signed and identified as being for
this purpose.
When setting up the SIPLACE
HS-50, make certain that the sur-
face it is placed on possesses the
required load bearing capacity.
Commissioning
CommissioningCommissioning
Commissioning
For commissioning, install the fol-
lowing components which were
not premounted upon delivery:
§ Monitor
§ Keyboard
§ Warning lamp
§ Component changeover tables.
Technical Data:
Transporting and Commissioning
Transport dimensions
Length with packing
Width with packing
Height with packing
2560 mm
2380 mm
1495 mm
Center of gravity (X,Y coordinates) 0 mm, 0 mm
Floor load (more details about floor characteristics on request)
Total weight of equipped machine 3.5 metric tons
Permissible surface load sub-floor
(load per unit area on mounting feet)
(based on assumed distribution of
machine weight to three machine legs
a
)
11.25 kg/cm
2
a) Worst case scenario; 6 legs per machine installed, area per leg: 104 cm
2
.
Center of Gravity of SIPLACE HS-50
PCB Transport Direction
Dimension of
Transport Box
696
X
Y
(
0
,
0
)
388
487
Foot
p
rints
All Units in mm
32
Possible Machine Configuration
PCB Transport Direction
Right Side 1 and 2
Left Side 1 and 2
Nozzle Changer
5 Magazines with
12 Nozzle positions each
Changeover Table with
12 Feeder Places
e.g. for Tapes, Bulk
12-Nozzle Collect & Place
Head
5-Section Dual Conveyor with
Automatic Width Adjustment from
50 x 50 mm
2
to 368 x 216 mm
2
(2" x 2" to 14.5" x 8.5")