00196068_Install_Vista_unattended.pdf - 第13页
Installation Manual for Windows Vista (unattended setup) 11/2007 US+DE Installationsanleitung für Windows Vista (unattended setup) Fig. 9 Network Configuration → Enter the host name of your computer. → Enter the workgrou…
Installation Manual for Windows Vista (unattended setup) 11/2007 US+DE
Installationsanleitung für Windows Vista (unattended setup)
1. Hard Disk Configuration
To change the default partition configuration of the first hard disk, click on the button Configure of the option
Harddisk Configuration.
Fig. 8 Hard Disk Configuration
Your settings are displayed in the graphical view.
→ Enter the size of the first partition in the field Size. You can change the value by using the “+/-” button or enter
the value directly.
→ If you want to use the whole disk with only one partition, click on the Whole Disk button.
→ Click the OK button to apply your changes.
→ If you want to reset the default settings, click the Reset button.
→ If you want to cancel configuration and return to the main page, click the Cancel button.
2. Network Configuration
To change the default network configuration, click on the button Configure of the option Network Configuration.
12 36 /
Installation Manual for Windows Vista (unattended setup) 11/2007 US+DE
Installationsanleitung für Windows Vista (unattended setup)
Fig. 9 Network Configuration
→ Enter the host name of your computer.
→ Enter the workgroup name.
→ Select the connection you want to configure.
→ Enter the IP address for the selected connection.
→ Enter the subnet mask for the selected connection.
→ Enter the default gateway for the selected connection.
→ If you want to extend the current hostname with the last two values of the IP address of the selected
connection, click on the button Build Hostname from IP
→ Click the OK button to apply your changes.
→ If you want to reset the default settings, click the Reset button.
3. Hosts Configuration
To change the entries of the hosts file, click on the button Configure of the option Hosts Configuration.
Fig. 10 Hosts Configuration
→ Select the entry.
13 / 37
Installation Manual for Windows Vista (unattended setup) 11/2007 US+DE
Installationsanleitung für Windows Vista (unattended setup)
→ If you want to add a new entry, click the New entry button.
→ If you want to delete the selected entry, click the Delete entry button.
→ You can change the name of the selected entry in the field Name.
→ You can change the IP address of the selected entry in the field IP- Address.
→ Click the OK button to apply your changes.
→ If you want to reset the default settings, click the Reset button.
5.1.8 Software Configuration
The following dialog is displayed:
Fig. 11 Software Configuration
The software configuration depends on the selected usage.
→ Select the SIPLACE products you want to use on this computer by activating the check boxes.
→ To display the detailed software products click on the “+” buttons in the menu tree.
→ Click the Next button to continue.
For some selected products, the configuration of prerequisites is required.
In this case the following dialog is displayed:
Fig. 12 Prerequisite configuration (Example)
→ Verify and modify the settings of the prerequisite.
14 37 /