00196784-02_VD_Traceability_3.3_DE_EN.pdf - 第32页
Requirements Optional Hardware Requirements 32 SIPLACE Traceability 3.3 3.3 Optional Hardware Requirements ▪ Splice sens or – For X feeders: Hardware insta lla tion only see al so "Job Gu ide Feeders 8-88 mm X"…
Requirements
Software Requirements
SIPLACE Traceability 3.3 31
3 Requirements
3.1 Software Requirements
To run the Traceability 3.3 system, you must install the following software:
▪ SIPLACE Pro 9.3 (recommended), 9.2, 8.0 (compatible)
▪ Setup Center 4.2
▪ SIS 9.3 (recommended), 9.1, 8.0 (compatible)
▪ Trace Service 3.3
▪ Trace Monitor 3.3
▪ Station software:
– 407.05 (SIPLACE 80 F4, F4-6, S20; F5, F5 HM, S23)
– 505.05 SP2 (SIPLACE S25 HM, S27 HM, HS50, HS 50+, HS60, HF, HF3)
– 605.03 (SIPLACE X2, X3, X4; D1, D2, D3, D4)
– 704.03 (SIPLACE X2, X3, X4, X4I, SX1, SX2, SX4)
– 705.04 (SIPLACE X2, X3, X4, X4I, SX1, SX2, SX4)
3.2 Time Sync
To ensure that you can trace board production data properly at a later date, it is important that all systems
involved have synchronized time keeping. The individual times in the various systems can be automat-
ically synchronized with the SIPLACE Time Sync tool.
SIPLACE Time Sync is a client server application, which helps to synchronize the time at all SIPLACE
machines and all traceability or line computers (client) via the SIPLACE Pro computer or a central time
server (server). Time Sync is installed and configured on one particular computer as a time server and
on one or more other computers as a client.
The SIPLACE Pro computer has proven to be an ideal time server.
NOTICE
Time Sync
After installing the Time Sync server and Time Sync client, check the settings for "Time Sync"
and correct the times where necessary, at the Time Sync client.
The current Time Sync software and software instructions can be found on one of the Support
Media DVDs (item no: 00388693-xx or 00388694-xx), supplied with each software product.
Requirements
Optional Hardware Requirements
32 SIPLACE Traceability 3.3
3.3 Optional Hardware Requirements
▪ Splice sensor
– For X feeders: Hardware installation only see also "Job Guide Feeders 8-88 mm X" (item no:
00194487-xx) or"Service SIPLACE X Feeder Care (item no 00196601-xx (German) or
(0019602-xx (English))"
– For S feeders: only available for machine versions 407 and 505
Hardware installation only (table controller V2.0; Hub V2.31)
see also “Retrofitting instructions Splice Sensors 8 - 72 mm” (item no: 00193365-xx)
▪ Board barcode reader: in accordance with the machine type:
– see "PCB Barcode Assembly Instructions" (item no.: 00193891-xx)) for hardware installation and
software configuration via the CLV barcode reader software at SIPLACE F/S/HS/HF/X and D se-
ries machines
– see "PCB Barcode Assembly Instructions for SIPLACE SX1/SX2" (item no.: 00196625-xx) for
hardware installation and software configuration of barcode readers at SIPLACE SX1/SX2 se-
ries machines
▪ Reading the PCB barcode:
– with internal PCB camera (licensed required and dependent on station software)
– with an external scanner
NOTICE
Splice sensors
Splice sensors for X feeders are available for X and SX series machines only.
System Requirements and Software Components
System Requirements for SIPLACE Traceability
SIPLACE Traceability 3.3 33
4 System Requirements and Software Components
4.1 System Requirements for SIPLACE Traceability
The following hardware and software requirements must be fulfilled, before SIPLACE Traceability can
be installed.
Recommended hardware
▪ Processor with 3.2 GHz
▪ 2.5 GB RAM
▪ 100 GB hard drive capacity (only when using the traceability database)
Software
▪ Server environment - one of the following versions:
– Preferred: Windows Server 2008 R2 (64 Bit)
– Compatible: Windows Server 2003 SP2, Windows Server 2003 R2, Windows Server 2008 SP 2
(32 Bit), Windows Server 2008 SP 2 (64 Bit)
▪ Supported database:
– Preferred: MS SQL Server 2008 R2 (32 Bit)
– Compatible: MS SQL Server 2005 SP3 (32, 64 Bit), MS SQL Server 2008 SP1 (32, 64 Bit)
– For testing and training purposes only: MS SQL Server 2005 SP3 Express(32, 64 Bit), MS SQL
Server 2008 SP3 Express (32, 64 Bit)
– MS SQL Server 2008 R2 Express (32, 64 Bit)
▪ The software required for running traceability can be found on the Support Media DVD. This in-
cludes:
– Java 2 Java Runtime Environment 1.6
– SQL Server 2008 SP1 Express (for testing and training purposes only)
– Tomcat Web Server 5.5
– Microsoft.NET 3.5 SP1 Framework
– Microsoft Internet Explorer 7.0, 6.0 SP2
– Adobe Acrobat Reader 9.3
– License Manager 2.2 SP1
The following software is not supplied on the Support Media DVD and must be acquired separately, if
needed:
▪ MS Excel 2000/2003 (to visualize exported CSV files in Trace Monitor)
▪ MS SQL Server 2008 (standard edition)
▪ MS SQL Server 2008 R2 (standard edition)
▪ MS SQL Server 2005
NOTICE
Station based traceability
For machine-based traceability, the SIPLACE placement machines must be equipped with the
options "Setup verification" and "Traceability".