TM2248_Explanation Document of DualLane MachineYS24(DL)YS24X(DL).pdf - 第10页
MDOC - SOFT50073 10 • [B o ard ] – [Mount] t ab [The column of “Lane”] The column of “Lane” is newly add ed. The value shows which l a n e the mounting is executed. Th i s it em cannot be ed ited. [Lane select button] Th…
MDOC
-
SOFT50073
9
• [Board] – [Board] tab
[Mount Mode] and [Transfer Mode]
“Mount Mode” and “Transfer Mode” above-mentioned are displayed.
“Mount Mode” cannot be edited, because the mount CT is greatly affected by
changing this setting. This mode can be set only in Optimizer.
“Transfer Mode” can be edited.
[Other Setting]
“Board Size”, “Board Comment”
and “Board Count” can be edited in
each lanes.
The other items cannot be edited in
each lanes. So it is reflected in the
other lanes when they are edited in
one lane.
3. The detail of each screen
MDOC
-
SOFT50073
10
• [Board] – [Mount] tab
[The column of “Lane”]
The column of “Lane” is newly added.
The value shows which lane the
mounting is executed.
This item cannot be edited.
[Lane select button]
This button is for filtering of the
mounting data. The mounting
data of a chosen lane is
displayed.
When “All Lane” is selected, all
mounting data are displayed.
3. The detail of each screen
MDOC
-
SOFT50073
11
• [Board] - [Offset], [Fiducial], and [Badmark] tab
[Lane select button]
Block data, fiducial data, and
badmark data of each lane is
displayed.
When the board data which
produces both sides of board is
selected, this button is displayed.
In case of the board data which
produces one side of board , this
button is not displayed.
3. The detail of each screen