TM2248_Explanation Document of DualLane MachineYS24(DL)YS24X(DL).pdf - 第27页

MDOC - SOFT50073 27 5. About Automatic Program Cha nge-Over (Option) • B OAR D ID <Operation Proc edure> The r e i s no change in operation procedure. <Other > In “Sel e ct Sc ann er ” combo box at [Machine] …

100%1 / 30
MDOC
-
SOFT50073
26
• KANBAN
“Input KANBAN” screen at
single lane machine.
<“Clear” button>
When the “Input KANBAN” screen is
opened, “ASSY” information now in
production is displayed.
Therefore, when you want to change the
one lane unused, please tap “Clear” button.
After that, the information such as “ASSY”
or “Program Name” becomes blank.
<Each Program Name>
The “Board Name” of each lane is displayed.
When the production is performed with in only one
lane, the board program is switched to the file of
this item.
<Board File Name>
When the “ASSY” of both lanes are input, the file name of the combined board data is displayed.
The combined board data is searched by the “Board Name” of both lanes. And it is displayed
when target board data was found.
If nothing is displayed in this item though the “ASSY” of both lanes is input, there is not the file to
change. In this condition, if OK button is tapped, an error message “Ea25690:Board data un-
registering error” is displayed.
<Note>
* There is no change in “Program List”.
* The “Board Name” corresponding to the “ASSY” and “Surface Info” is searched in the program list. Then the
combined program including the “Board Name” of both lanes is searched, and the program change is performed.
* “Lane” is added to KANBAN barcode. Please prepare the barcode as appropriate.
<Explanation of screen>
5. About Automatic Program Change-Over (Option)
MDOC
-
SOFT50073
27
5. About Automatic Program Change-Over (Option)
• BOARD ID
<Operation Procedure>
There is no change in operation procedure.
<Other>
In “Select Scanner” combo box at [Machine] - [Machine Information] - [Option
Setting] - [Scanner Setting], “Board Top (Lane2)” and “Board Bottom (Lane2)”
are selectable.
<Details of machine sequence>
By the “ASSY” of the board that arrived at the upper machine exit position, the
suitable board data are searched automatically.
At the following page, search direction is illustrated with examples.
MDOC
-
SOFT50073
28
• BOARD ID
AAA
<Example 1>
Program list to use and the board data which is prepared for are shown in the right
figure.
1. A board of the ASSY “AAA” arrives at exit position of Lane1 in Machine A.
2. In Machine B, the board data is switched to the board data file of “DATA_A”.
3. After that, a board of the ASSY “BBB” arrives at the exit position of Lane 2 in
Machine A.
4. In Machine B, the board data is switched to the board data file of “CMB_DATA_AB”.
The program name of ASSY “BBB” is “DATA_B”, and the production of “DATA_A” in
Lane1 is executed. Therefore switching board is executed to the board data file of
“CMB_DATA_AB”.
5. When a board of the ASSY “AAA” arrives at exit position of Lane1 in Machine A,
switching board is not executed, and carry it out to Machine B.
Upper
Machine A
ASSY Boardface ProgramName
AAA DATA_A
BBB DATA_B
Program list
The chosen board data file
doesn’t exist.
Machine B
BBB
AAA
BBB
AAA
BoardFileName BoardNameLane1 BoardNameLane2
DATA_A DATA_A
DATA_B DATA_B
CMB_DATA_AB DATA_A DATA_B
The prepared board data list.
5. About Automatic Program Change-Over (Option)
Machine A Machine B Machine A
The chosen board data file is
“BOARD A”
AAA
The chosen board data file is
“CMB_DATA_AB”
The first machine B which
performs BOARD ID.