TM2248_Explanation Document of DualLane MachineYS24(DL)YS24X(DL).pdf - 第12页
MDOC - SOFT50073 12 • Teach an d tr a ce screen [Lane select button] Teach and trace the coordinate of mount, block, f id ucial and badmark are avail able. In the case of same side of board is sel ected, w hen the block,…
MDOC
-
SOFT50073
11
• [Board] - [Offset], [Fiducial], and [Badmark] tab
[Lane select button]
Block data, fiducial data, and
badmark data of each lane is
displayed.
When the board data which
produces both sides of board is
selected, this button is displayed.
In case of the board data which
produces one side of board , this
button is not displayed.
3. The detail of each screen
MDOC
-
SOFT50073
12
• Teach and trace screen
[Lane select button]
Teach and trace the coordinate of
mount, block, fiducial and badmark
are available.
In the case of same side of board is
selected, when the block, fiducial,
and badmark information is edited
in either lane selected, the value is
reflected in the other lane.
3. The detail of each screen
MDOC
-
SOFT50073
13
• [Monitor] – [Production] tab and Error message
[Production]
The boards in both lanes are displayed.
In order to display the place where error
occurred and the operation position, two
lanes are displayed on one screen.
[Select Operative Position]
If the transfer error occurred, the machine
stops immediately. So the operation position
is not divided into each lane.
[Error Message]
As for the error message in relation to the conveyor
lane, it is displayed by the right corner of the error
message.
3. The detail of each screen