TM2248_Explanation Document of DualLane MachineYS24(DL)YS24X(DL).pdf - 第23页

MDOC - SOFT50073 23 • A b out the “Pass Tr an s fer” mode – To execute pass transfer in the one side la ne, combined board d ata w it hou t the mo un t i ng information of target lane is necessary. – If t h e sett i ng o…

MDOC

SOFT50073

• About the “Output Prior Lane Signal” function

– Summary

• When the board data which produces same side of board is selected, the signal (LS-OUT: Lane

Select) output to the upstream machine to let it know which lane is vacant.

– Setting

• Set [Machine]-[Installation Setting]-[Output Prior Lane Signal] to “Use”.

– Details

• The LS signal output for both lanes are not performed at the same time (exclusive control).

• When the board in the wait position started being carried to the mounting position, the LS signal

output.

• The LS signal itself doesn’t allow starting transfer.

– Authorization condition of starting transfer is input of BA signal at target lane.

• The LS signal is output only when the “ADVANCED-GATE” is selected.

4. The detail of machine workings

MDOC

SOFT50073

• About the “Pass Transfer” mode

– To execute pass transfer in the one side lane, combined board data

without the mounting information of target lane is necessary.

– If the setting of “Execute/Skip” at [Mount] tab is set “Skip”, Pass

transfer is executed in all lanes.

– In the case of using the conventional board data such as YGX

format

• When this board format is used, the one side lane becomes unused.

• When the one side lane becomes unused, the transfer signal or the

board transfer does not work.

4. The detail of machine workings

MDOC

SOFT50073

• In dual lane machine, automatic program change-over function

is available.

• In this chapter, the differences from the conventional single lane

machine and limitations are explained.

5. About Automatic Program Change-Over (Option)