00197465-01_SM_CP20-A-M_EN.pdf - 第5页
1 Introduction 1.1.1 Conventions for the use of safety instructions 1.1 Safety Instructions Service Manual SIPLACE C&P20, C&P20A, C&P20M 5 1 1 I n t r o d u c t io n Introduction This service guide is a manua…
Contents:
4 Service Manual SIPLACE C&P20, C&P20A, C&P20M
5 Settings 51
5.1 Overview of Spare Parts and Settings for C&P20A 51
5.2 Optical Nozzle Query (Nozzle Scanning) 52
5.3 Calibration 52
5.3.1 Calibrating the Heads and Cameras 53
5.3.2 Calibration Procedure (C&P, CPP, DLM) 53
5.4 Zero Point Correction for the Star and Z Axis 54
5.4.1 Transfer head specific data to the machine data after manual head exchange 54
5.4.2 Determination of Z and Star axes zero point correction (SITEST) 55
5.4.3 Determining the zero point correction value for the star and Z axis from SW605.03.SP1 57
5.4.4 Determining the Zero Point Correction Value for the Star and Z Axis from SW705.04 58
5.5 Calibrating the Digital Pressure Control Valve 61
5.5.1 Zero Point Calibration of Pressure Control Valve 61
5.5.2 Calibrating the Closed Vacuum 61
5.5.3 Checking the Pressure Tightness of the Vacuum System 62
5.5.4 Checking the Air Blast 62
5.6 Transferring the head specific data 63
5.6.1 Transmitting the Head-Specific Data (from SW601) 63
5.6.2 Transferring the Head-Specific Data (from SW701) 65
6 Description of the Circuit Boards 67
6.1 Intermediate distributor C&P20 [03002942-xx] 67
6.2 VLT23 [03003002-xx] 71
6.3 ED distributor C&P20 [03003082-xx] 71
1 Introduction
1.1.1 Conventions for the use of safety instructions 1.1 Safety Instructions
Service Manual SIPLACE C&P20, C&P20A, C&P20M 5
1
1 Introduction
Introduction
This service guide is a manual or reference work for performing service work on the SIPLACE® C&P20,
C&P20A and C&P20M placement head types.
1.1
1.1 Safety Instructions
Safety Instructions
1.1.1
1.1.1 Conventions for the use of safety instructions
Conventions for the use of safety instructions
This manual contains notes that must be observed to guarantee your personal safety and to avoid dam
-
age to equipment. These notes are highlighted by warning triangles and are indicated as follows accord
-
ing to the level of risk:
DANGER
Nonobservance of these safety instructions may cause injury to personnel and damage to the
machine!
► Please observe the safety instructions in the user manual of the relevant machine for all
work!
DANGER
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam
-
age to property will occur if this hazard warning is not observed.
WARNING
Definition
For the purposes of this manual, this indicates that fatal or severe injuries or considerable dam
-
age to equipment may occur if these warning instructions are not followed.
CAUTION
Definition
For the purposes of this manual, this indicates that minor injuries or damage to property may
occur if this caution is not observed.
NOTICE
Definition
For the purposes of this manual, this note provides information about the product or indicates
a part of the manual that requires particular attention.
1 Introduction
1.1 Safety Instructions 1.1.2 Safety Instructions for the Compressed Air Supply
6 Service Manual SIPLACE C&P20, C&P20A, C&P20M
1.1.2
1.1.2 Safety Instructions for the Compressed Air Supply
Safety Instructions for the Compressed Air Supply
1.1.3
1.1.3 Safety Instructions on Hazardous Materials
Safety Instructions on Hazardous Materials
CAUTION
Risk of injury from compressed air!
Risk of injury when disconnecting the compressed air lines.
► NEVER disconnect compressed air lines while they are still pressurized.
CAUTION
Prolonged interruptions to the compressed air supply can cause damage.
When the machine is switched on, do not use the shutoff valve to interrupt the compressed air
supply for more than 30 minutes.
► If you need to shut off the compressed air system for longer, in order to carry out mainte
-
nance or servicing work, you must switch the machine off at the main switch and disconnect
it from the power supply.
CAUTION
Observe the safety data sheets
Observe the applicable safety data sheet, when handling hazardous materials (e. g. Loctite
241, ethanol).