forte_en.pdf - 第103页
Page 103 12 Document history D o c u m e n t r e v i s i o n M o d i f i c a t i o n s m a d e 2 0 1 3 - 0 7 - 0 3 N e w l y c r e a t e d d o c u m e n t 2 0 1 3 - 1 2 - 1 8 M i n o r t e x t c o r r e c t i o n s 2 0 1…
Page 102
11
HPRAVR
HPRAVR is an optional accessory for PRESTO and FORTE
programmers for programming AVR microcontrollers in
applications with the ISP10PIN standard connector on the
device's side and with the ICSPCAB8 cable on the
programmer's side. The ISP10PIN connector is typically
used on boards with microcontrollers of the AVR type
such as STK500, for example.
11.1
Usage
Connect the HPRAVR adapter to the application's
connector. Make sure that pin 1 of the HPRAVR adapter is
connected to pin 1 of the ISP10PIN connector in the
application (Pin1 is marked with a red dot at HPRAVR
while it may be marked in different ways on the
connected application – see information in the
corresponding manual).
Now interconnect the adapter and FORTE with an ICSP
cable. Pin2 in the cable is used as the key. The following
picture illustrates a typical interconnection of the PRESTO
programmer with an application through the HPRAVR
adapter:
Fig.50: Use of HPRAVR
Important Warning
Pin No.1 of the HPRAVR adapter is marked
with red color. Please double check the
position of the pin No.1 in the application as
the application could be damaged if
incorrectly connected.
Fig.51: ISP10PIN, top
view
Fig.52: HPRAVR adapter diagram
Page 103
12
Document history
Document
revision
Modifications made
2013-07-03
Newly created document
2013-12-18
Minor text corrections
2014-02-28
The NXP LPC2xxx family was added in the JTAG
Interface chapter
New command line parameter [/read]
2014-04-25
The STM8 family was added in the Connection
Examples chapter
2014-07-01
The ARM SWD interface was added in the
Connection Examples chapter
CE certificate was replaced by Declaration of
Conformity
2014-09-23
A note about reset of MCU ARM SWD was cleared.
Described new option - Show only the lowest byte of
word in ASCII
2014-11-21
Updated list of variables for up_dll.dll
2014-11-25
New settings of the UP program have been added.
2015-02-03
Added View/Console menu description.
Added description of PIC32MZ_BootProg variable.
Small text fixes.
2015-03-12
The name of item Delay for VDD switching on/off
has been changed
Added description of the checksum settings
2015-04-07
Updated description how to create SVF file for
Lattice.
2015-05-19
A chapter about forte.dll was added.
The C8051 and EFM8 C2 interface was added in the
Connection Examples chapter.
Definition of input voltage on pins was added.
Description of w=32 parameter for Windows
messages was added.
2015-08-05
Description of the programmer driver installation
has been changed.
Added new /getpartrev parameter.
Added new commandline errorcodes.
2015-09-21
Added description of the setting of the warning
when the loaded file is not aligned to a word size.
Fixed links.
2015-11-19
Added description of setting of the T pin during and
after programming.
2016-01-22
The serial numbers logging description has been
updated.
2016-03-08
Added description of the Display programmer form
function.
Added description of the setting which disables the
VPP before VCC warning.
2016-05-20
The PE description has been updated.
Added description of the start and end address for
the SPI Flash memories.
2016-08-10
Description of the HCSxxx connection has been
added.
2016-10-10
Added description of the /sn commandline
parameter and manual serial numbers description.
Added the commandline error code 9 description.
2016-12-15
Description of usage of the programmers at Linux
has been added.
2017-02-02
Added description of auto programming in the Mass
production window.
Added description of Keep manually modified data.
2017-02-10
The Linux driver instalation chapter has been
completed.
2017-03-13
A link to lin_ftd2xx has been added.
2017-03-23
Added description of /q1 commandline parameter.
2017-05-09
Added description of "Load last project on start-up"
option.
Page 104
2017-06-29
Added chapter about MultiUP utility.
2017-10-30
Description of the AVR UPDI connection has been
added.
Added description of "When using Windows
Messages disable other warnings" option.
Added description of "Write checksum to log file"
option.
2017-11-22
Added description of RL78 connection.
2018-02-19
HPRAVR chapter moved.
2018-03-28
Added description of "Device info" menu item.
2018-05-17
Added RX600 connection description.
Added description of Renesas RX600 settings.
2018-06-07
Added AT89C51CC01UA connection decription.
2018-07-30
Added a note to Debug fuse of MCU PIC.
Added a note to AVR UPDI files mapping.
2018-08-10
Added description where Linux FTDI driver can be
found.
Added a note to commandline parameters.
2019-01-25
Description of saving fuses to ini function has been
added.
Write RC osc Adjustment function description has
been added.
2019-01-31
Added description of how to read the ProgressBar
value in the quiet mode.
2019-02-26
Added a note for DS28E05.
Added description of Read address function
Added description of Windows Messages wParam of
24 and 25.
2019-04-23
Added description of /df parameter, description of /p
and /o parameters has been updated.
2019-06-26
Updated description of /s commandline parameter.
Added description of "Lock project" function.
Added description of function setting actual SN from
log file.
2019-07-26
Added HCS08 connection description.
2019-09-20
Company address has been changed.
2019-10-24
HCS08 note has been modified.
Added chapter about up_control.dll
2019-12-18
Added AVR HVP connection description.
2020-01-10
Added Autoload next file function description.
2020-03-31
Added description of /conf parameter.
Added list of parameters which are transferred to
already running UP instance.
Added description of the file locations only
programming.
Added description of the option switching off the
Device ID check.
2020-05-26
Added description of "Load project unlocked"
function.
Added description of how to use project on the
commandline.
2020-08-18
Modified AVR UPDI connection.
2021-01-11
Driver installation description has been updated.
SDA internal pull-up disable option has been
described.
UP software installation description has been
updated.
JTAG Player -s parameter description has been
updated.
2021-02-25
Fixed Windows Message w=48 description.
Fixed Windows Messages table.
Added a description of a Recently used devices list.
2021-03-15
Some typing errors have been fixed.
2021-12-23
Added a picture and a description of QUAD SPI
interface.
2022-01-07
Added a note concerning 34AA04 memory.
Rules settings were changed for Linux installation.
2022-01-14
Description of comments in serial numbers files has
been extended.
2022-05-23
Added LPC UART connection description.
2022-06-28
Projects description at commandline chapter has
been modified.