ASM贴片机CPP头半年保养.pdf - 第14页

在线预览 ASM贴片机CPP头半年保养.pdf PDF 文档。

3 6-monthly CPP Remove the holding circuit 2 min 1 / 1

CAUTION!Refer to safety instructions in user manual before commencing Mainten-

ance

NOTICE! ESD guidelines are to be followed Tool:

T13, T21, T44, T76

Wear Part: Consumables:

1 Proceed with the head stand flat on the

table.

2 Loosen the fixing and take out the

screwed joint.

3 Take out the holding circuit housing to-

gether with the silencer.

4 Pay attention not to damage the flex

cables while removing the holding circuit

in the next step.

5 Loosen the 6 screws fixing the holding cir-

cuit.

6 Insert the screwed joint by two turns and

remove the holding circuit to clean it in the

ultra sonic bath. See appendix "Maintain

the holding circuit".

4 6-monthly CPP Exchange / maintain the PRV 2 min 1 / 2

CAUTION!Refer to safety instructions in user manual before commencing Mainten-

ance

NOTICE! ESD guidelines are to be followed Tool:

T12, T47, T79

Wear Part: Consumables:

1 Put the front plat flate on the table with the

race way pointing down.

2 Take out both fixing screws. 3 Unscrew the cable clamp.

4 Press the two clips at the side and discon-

nect the ribbon cable.

5 Unscrew both screws and take the mount-

ing plate away.

6 Exchange the PRV with a maintained one.

See appendix "Maintain the PRV".