ASM贴片机CPP头半年保养.pdf - 第48页
在线预览 ASM贴片机CPP头半年保养.pdf PDF 文档。
17 6-monthly CPP Mount the PRV 3 min 1 / 1
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T21, T47, T78
Wear Part: Consumables:
1 Proceed with the head stand flat on the
table.
2 Plug in the hoses at the pressure regulator
valve.
3 Plug in the hose at the screwed joint.
4 Mount the PRV to the front part. NOTE the
different length of screw (1) and screw (2).
5 Tighten both screws with a torque of 0,9
Nm.
6 Press the two clips at the side and con-
nect the ribbon cable properly.
18 6-monthly CPP Clean the component sensor 1 min 1 / 2
CAUTION!Refer to safety instructions in user manual before commencing Mainten-
ance
NOTICE! ESD guidelines are to be followed Tool:
T14, T21
Wear Part: Consumables:
C5, C22
1 Proceed with the head stand flat on the
table.
2 Take off the component sensor protection. 3 Clean the right prism of the component
sensor using an slightly alcohol moistened
cleaning stick.
4 Clean the left prism of the component
sensor using an slightly alcohol moistened
cleaning stick.
5 Dry the right prism of the component
sensor.
6 Dry the left prism of the component
sensor.